Katalog Produk

Keterangan

The EDAS/VIS System includes a Hardware: DAIB Data Acquisition Interface Box + DAB. Data Acquisition Board and a Software: EDAS/VIS-SOF.
Data Acquisition and Virtual Instrumentation Software:

1 DAIB. Data Acquisition Interface Box:
Steel box.
Dimensions: 310 x 220 x 145 mm. approx.
Front panel:
16 Analog inputs.
Sampling velocity 1,250,000 samples per second for EDAS/VIS 1.25 Version.
Sampling velocity 250,000 samples per second for EDAS/VIS 0.25 Version.
2 Analog outputs.
24 Digital inputs/outputs, configurable as inputs or outputs, with 24 state led indicators. These digital inputs/outputs are grouped in three ports of eight channels (P0, P1 and P3).
Digital signal simulator.
Analog signal simulator.
Main ON/OFF switch.
Inside:
Internal power supply of 12 and 5 V. Potentiometer.
Back panel:
Power supply connector.
SCSI connector (for connecting with the data acquisition board).
Connecting cables.

2 DAB. Data Acquisition Board:
For EDAS/VIS 1.25 Version:
PCI Data acquisition board (National Instruments) to be placed in a computer slot. Bus PCI.
Analog input:
Number of channels= 16 single-ended or 8 differential.
Resolution=16 bits, 1 in 65536.
Sampling rate up to: 1,250,000 S/s (samples per second).
Input range (V)=± 10V.
Data transfers=DMA, interrupts, programmed I/0. Number of DMA channels=6.
Analog output:
Number of channels=2.
Resolution=16 bits, 1 in 65536.
Maximum output rate up to: 833 KS/s.
Output range(V)=±10.
Data transfers=DMA, interrupts, programmed I/0.
Digital Input/Output:
Number of channels=24 inputs/outputs.
D0 or DI Sample Clock frequency:0 to 1 MHz.
Timing:
Counter/timers=2.
Resolution: Counter/timers:32 bits.
For EDAS/VIS 1.25 Version:
Sampling rate up to: 250,000 S/s (samples per second).
Rest of characteristics are the same.

3 EDAS/VIS-SOF.Data Acquisition and Virtual Instrumentation Software:
Compatible with actualWindows operating systems.
Amicable graphical frame.
Configurable software allowing the representation of temporal evolution of the different inputs and outputs.
It allows all data store in a file (16 analog inputs, 2 analog outputs, 24 digital inputs/outputs at the same time).
Print screens and reports of the signals at any time.
Quick capture in a period of time and posterior representation (Sampling and Hold).
Two signal generators, independent for sinusoidal, triangular, saw and square.
Visualization of a tension of the circuits on the computer screen.
Sampling velocity 1,250,000 samples per second for EDAS/VIS 1.25 Version.
Sampling velocity 250,000 samples per second for EDAS/VIS 0.25 Version.
Measurement, analysis, visualization, representation and report of results.
All 16 input channels could be scaled to compare signal with different voltage levels.
Virtual instrumentation functions:
Digital oscilloscope.
Multimeter.
Function generator.
Spectrum analyzer.
Transient recorder.
Logic analyzer.
Logic generator.

Manuals:
This system is supplied with 8 manuals: Required Services, Assembly and Installation, Interface and Software, Starting-up, Safety, Maintenance, Calibration (for computer controlled units) & Practices Manuals.

This system can be used with:
- All Modules type “M� (M1 to M99) of Basic Electronics (LIELBA).
- All Modules type “ED-CAM, ED-CFM and EDICOM� of Communications (LICOMBA).
- Transducers and Instrumentation Trainer (SAIT).
* Any other electronic board. Masukan ke Produk RekananKenalkan ke teman Anda