Selamat Datang!
Gabung Sekarang
|
Masuk
Menu Anggota
|
Bantuan
|
0
SEMUA
PRODUK
JUAL
BELI
PERUSAHAAN
Mengenalkan Indotrade.com kepada teman
*
artinya harus diisi
*
Nama Anda:
*
Email Anda:
*
Email Teman Anda: :
Untuk mengirim lebih dari satu orang, pisahkan setiap email dengan koma.
Contoh: nama1@domain.co.id, nama2@domain.co.id dan seterusnya
*
Pesan:
Halo, Saya Pebisnis Saya mengenal produk ini dari https://www.indotrade.com dan saya lihat hal ini mungkin berguna untuk anda. ------------------------------------------------------- STANHOPE SETA, Seta Multiflash Pensky-Martens Flash point tester ( Use with Multiflash base unit 34000-0) The flash point Test Area consists of an electrically heated solid block / air bath with a removeable sample cup and lid. The lid is equipped with a stirrer, rotating shutter, and ports for the flash detector and sample temperature probe. The DIPS pod contains a fire detection probe, stirrer drive, shutter actuator and ignitor dipping mechanism with a coaxial gas jet / electric hot wire ignitor. The sample temperature probe is a class A PRT, and flash detection is by a thermocouple. Safety features include an initial dip to check that the sample is below its flash point, a PRT check to ensure that the correct probe is connected and is immersed in sample, and new 10° C dipping protocol. When in search mode, the software limits the maximum temperature to 50° C above " expected flash" . A bath temperature probe protects against over-temperature, and an independant fire detection probe is mounted over the test area. The optional 34008-0 Cooling Boost Module allows the test area to be rapidly cooled in between tests by a blast of compressed air. Supplied with: DIPS pod, Test Area, Ignitor, Flash Detector, Sample PRT, interconnection leads, and instruction manual. Note: 34000-0 Universal Base Unit required for operation. SPECIFICATIONS Temperature range Ambient to 400° C Bath Solid Block / Air Heating Bottom and side heaters Post Test Cooling Fan assisted or Forced Air ( Requires 34008-0 Cooling Boost Module option) Post Test Cool-down Time ( 90° C to 50° C) 36 minutes ( Fan) 6 minutes ( Forced Air) Ignitor Quick-fit coaxial gas jet / electric hot wire, user selectable ( Electric hot wire pilot light for gas jet) Temperature Probes Class A Platinum Resistance Thermometer, ° C or ° F Stirrer Speed 105 & 250 rpm Gas Supply ( gas jet ignitor) Laboratory gas, 3kPa ( 0.44psi) maximum pressure Air Supply Dry compressed air, 670kPa ( 100psi) maximum pressure Voltage 110/ 120V or 220/ 240V, 50/ 60Hz, ( switchable) Power 1kW Size ( HxWxD) 40 x 45 x 34cm Weight 20kg HUBUNGI MARKETING KAMI: 081361177944, 061-8361483 Untuk informasi selengkapnya, silahkan ke http://www.indotrade.com/karuniamakmur/2364653
0.0817 194.163.150.105