Katalog Produk

Keterangan

Cole-Parmer® Portable Modular Calibrator

Modular Calibrators

Interchangeable pressure modules cover wide range— ± 0.125" H2O to 7500 psig
For a complete system, order a calibrator and module
Use these microprocessor-based modular calibrators to calibrate systems that measure pressure, flow, or leak rates. Rugged ABS plastic case with sealed keypad withstands high impact— ideal for boiler, HVAC, and clean room controls.
NIST-traceable calibrators and modules come with a certificate verifying traceability to NIST standards. NIST-traceable calibration certificate for modules includes ten test points. Modules and calibrators can be recalibrated separately.
For a complete system, order a calibrator from table above right and one or more modules from table above right. See accessories at right for more options.
Calibrators can accept up to two interchangeable pressure modules ( sold separately at right) . Simultaneously display two readings with units on the two-line LCD. Readings can be displayed in psi, " H2O, cm H2O, " Hg, mm Hg, kPa, mbar, or a single user-defined, field-programmable engineering unit. Calibrators feature a direct readout of minimum/ maximum pressure values, percentage of full-scale pressure readings, pressure leak values, and velocity/ volume flow rates.
Keypad BAT CK button identifies battery consumption— remaining voltage and estimated percentage of usable battery life is displayed. To ensure accurate readings, unit automatically turns itself off when remaining power drops below 20% of full power. To conserve battery life,

Specifications
Range from 20 to 120º F ( -7 to 49º C)
Accuracy from 20 to 120º ( -7 to 49º C) : ± 0.05% full-scale
Media compatibility clean, dry, inert, noncorrosive gaes
Display LCD, 2 lines of 15 alphanumeric characters
Output RS-232
Power two 9 V ( included)
Dimensions 4-1/ 4" L x 7-7/ 8" W x 3-1/ 4" H
Battery life approximately 30 hours of typical use
Brand Cole-Parmer Masukan ke Produk RekananKenalkan ke teman Anda