Keterangan :
With the storage menu and triggering function concentrated to assure safe use by anyone engaged in the production and a clear panel layout showing operations at a glance the DCS-7000 Series of oscilloscopes are easy-to-use models even for beginners in spite of the many versatile functions packed in each unit. The maximum sampling rate of 40 MS/ s ( DCS-7040) enables advanced waveform observations and an analog function ( 50 MHz) is also incorporated so that each model can play two roles of digital and analog. Each channel has a 4K-word acquisition memory. The peak detector and overwriting functions are provided in pursuit of a compatibility between the ease of use and the high functionality. Optional interfaces can also be installed so the waveforms displayed on the CRT can be hard-copied on a plotter or a special printer.
SPECIFICATIONS
CRT
Type 150mm rectangular, with internal graticule
Accelerating voltage Approx. 12kV
Effective area 8div.× 10div. ( 1div 10mm)
Vertical axis ( Common forCH1, CH2)
Operating modes CH1, CH2, ADD, ALT, CHOP
Sensitivity 1mV/ div., 2mV/ div. : ± 5%
5mV/ div. to 5V/ div. : ± 3%
Attenuator 1mV/ div. to 5V/ div., 1-2-5 step, ( fine adjustment)
Input impedance 1M© ± 2% , approx. 25pF
Frequency response
DC DC to 50MHz, (
3dB) 5mV/ div to 5V/ div.
DC to 20MHz, (
3dB) 1mV/ div, 2mV/ div.
AC 5Hz to 50MHz, (
3dB) 5mV/ div to 5V/ div.
5Hz to 20MHz, (
3dB) 1mV/ div to 2mV/ div.
Rise time Approx. 7ns ( 5mV/ div. to 5v/ div.)
Approx. 17.5ns ( 1mV/ div., 2mV/ div.)
Crosstalk Below
40dB ( at 1kHz)
Polarity inversion CH2 only
CHOP Frequency Approx. 250kHz
Maximum input voltage 800Vp-p or 400V ( DC AC peak)
Horizontal axis
Operating modes Set to X-Y mode by H MODE
CH1 : Y-axis CH2 : X-axis
Sensitivity Same as Vertical axis ( CH2)
Input impedance Same as Vertical axis ( CH2)
Frequency response
DC DC to 1MHz, within
3dB
AC 5Hz to 1MHz, within
3dB
X-Y phase difference Below 3 degrees at 50kHz
Maximum input voltage Same as vertical axis ( CH2)
Sweep
Sweep modes A sweep. B sweep, ALT
Sweep time
A 0.5s/ div to 0.1µ s/ div± 3% in 1-2-5 steps, 21 ranges, and fine adjustment
B 50ms/ div to 0.1µ s/ div± 3% in 1-2-5 steps, 18 ranges
Magnified sweep × 10± 5% ( ± 8% at 0.5¼ s/ div)
Linearity ± 3% ( 10MAG ± 5% )
Delay method Continuous delay, synced delay
Delay time 0.5s/ div to 0.1µ s/ div ; continuously variable from 0.2div.^ 10div.
Delay time error ± ( 3% of set value 1% of f.s.) ( 0 to 300ns)
Delay jitter 10, 000 : 1 of 10 times of the A sweep time
Hold off A Sweep : Continuously variable from NORM
Trace separation B separation from A is continuously adjustable to approx. ± 4 div.
Triggering
Trigger sources VERT, CH1, CH2, LINE, EXT
Mode AUTO, NORM, FIX, SINGLE
Trigger coupling AC, HFrej, DC, TV-FRAME, TV-LINE