Katalog Produk

Keterangan

The HD2301.0 is a portable instrument with a large LCD display. It measures rela-tive humidity and temperature using a Pt100 sensor or thermocouple humidity/temperature combined probe. Temperature only is measured by immersion, pen-etration or contact probes. The sensor can be a Pt100, Pt1000 or Ni1000.When the humidity/temperature combined probe is connected, the instrument calculates and displays the absolute humidity, the dew point, the partial vapour pressure.The probes are fi tted with an automatic detection module, with the factory calibra-tion settings already being memorized inside. The Max, Min and Avg function calculate the maximum, minimum or average values. Other functions include: the relative measurement REL, the HOLD function, and the automatic turning off that can also be disabled.The instruments have IP67 protection degree.
INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions (Length x Width x Height) 140x88x38mm
Weight 160g (complete with batteries) Materials ABS
Display 2x41D2 digits plus symbols Visible area: 52x42mm
Operating conditions
Operating temperature -5…50°C Stocking temperature -25…65°C Working relative humidity 0…90%RH without condensation
Protection degree IP67
Power Batteries 3 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20¼A
Measuring unit °C - °F - %RH - g/m3 - Td - hPa
Connections Input module for the probes 8-pole male DIN45326 connector
Measurement of relative humidity by Instrument
Measurement range 0…100%RH Resolution 0.1%RH
Accuracy ±0.1%RH
Drift after 1 year 0.1%RH/year
Measurement of temperature by Instrument
Pt100 measurement range -200…+650°C
Pt1000 measurement range -200…+650°C
Resolution 0.1°C
Accuracy ±0.1°C
Drift after 1 year 0.1°C/year
Common characteristics
Resolution 0.1°C
Temperature drift @ 20°C 0.003%/°C
Common characteristics
Relative humidity
Sensor Capacitive
Typical capacity @30%RH 300pF±40pF Resolution 0.1%RH
Temperature drift @ 20°C 0.02%RH/°C
Response time %RH at constant temperature 10sec (10�80%RH; air speed=2m/s)
Temperature with sensor Pt100 Resolution 0.1°C
Temperature drift @ 20°C 0.003%/°C
Temperature with thermocouple K - HP572AC
Resolution 0.1°C
Temperature drift @ 20°C 0.02%/°C
Common characteristics
Resolution 0.1°C
Temperature drift @ 20°C Pt100 0.003%/°C Pt1000 0.005%/°C

ORDER CODES
HD2301.0: The kit is composed of the instrument HD2301.0, combined probe HP472AC, 3 1.5V alkaline batteries, operating manual, case.
Probes complete with SICRAM module TEMPERATURE MEASUREMENT
TP472I: Immersion probe, sensor Pt100. Stem Ø 3mm, length 300mm. Cable length 2 metres.
TP472I.0: Immersion probe, sensor Pt100. Stem Ø 3mm, length 230mm. Cable length 2 metres.
TP473P.0: Penetration probe, sensor Pt100. Stem Ø 4mm, length 150mm. Cable length 2 metres.
TP474C.0: Contact probe, sensor Pt100. Stem Ø 4mm, length 230mm, contact surface Ø 5mm. Cable length 2 metres.
TP475A.0: Air probe, sensor Pt100. Stem Ø 4mm, length 230mm. Cable length 2 metres.
TP472I.5: Immersion probe, sensor Pt100. Stem Ø 6mm, length 500mm. Cable length 2 metres.
TP472I.10: Immersion probe, sensor Pt100. Stem Ø 6mm, length 1,000mm. Cable length 2 metres.
RELATIVE HUMIDITY AND TEMPERATURE PROBES
HP472AC: Combined probe %RH and temperature, dimensions Ø 26x170mm. Connection cable length 2 metres.
HP572AC: Combined probe %RH and temperature - thermocouple K sensor. Dimensions Ø 26x170mm. Connection cable length 2 metres.
HP473AC: Combined probe %RH and temperature. Handle dimensions Ø 26x130mm, probe Ø 14x110mm. Connection cable length 2 metres.
HP474AC: Combined probe %RH and temperature. Handle dimensions Ø 26x130mm, probe Ø 14x210mm. Connection cable length 2 metres.
HP475AC: Combined probe %RH and temperature. Connection cable length 2 metres. Handle Ø 26x110mm. Stainless steel stem Ø 12x560mm. Point Ø 13.5x75mm.
HP477DC: Combined sword probe %RH and temperature. Connection cable length 2 metres. Handle Ø 26x110mm. Probe’s stem 18x4mm, length 520mm.
Temperature probes without SICRAM module
TP47.100: Immersion probe sensor Pt100 direct 4 wires. Probe’s stem Ø 3mm, length 230mm. 4 wire connection cable with connector, length 2 metres.
TP47.1000: Immersion probe sensor Pt1000. Probe’s stem Ø 3mm, length 230mm. Connection cable 2 wires with connector, length 2 metres.
TP47: Only connector for probe connection: direct 4 wire Pt100, 2 wire Pt1000.
Accessories
HD11: Saturated solution at 11.3%RH@20°C for calibration of relative humidity probes, fi xing adapter M24x1.5
HD33: Saturated solution at 33.0%RH@20°C for calibration of relative humidity probes, fi xing adapter M24x1.5
HD75: Saturated solution at 75.4%RH@20°C for calibration of relative humidity probes, fi xing adapter M24x1.5
Protection for humidity probes HP472AC, HP572AC (M24x1,5)P1: Stainless steel grid protection for probes Ø 26 mm.
P2: 20¼ sintered polyethylene PE protection for probes Ø 26 mm. P3: 20¼ sintered bronze protection for probes Ø 26 mm.
P4: 20¼ sintered PE complete cap for probes Ø 26 mm.
Protection for humidity probes HP473AC, HP474AC, HP475AC (M12x1)P5: Stainless steel grid protection for probes Ø 14 mm.
P6: 20¼m sintered complete protection made of stainless steel for probes Ø 14 mm.
P7: 10¼m sintered complete protection made of PFTE for probes Ø 14 mm.