Katalog Produk

Keterangan

The HD2103.1 and HD2103.2 are portable instruments with a large LCD display. They are designed for use in the fi elds of air conditioning, heating, ventilation and environmental comfort.They use hot-wire or vane probes to measure air speed, fl ow rate, and tem-perature inside pipelines and vents. Temperature only is measured by immersion, penetration or air contact probes. The temperature sensor used can be chosen from the Pt100, Pt1000 or Ni1000.The probes are fi tted with the SICRAM module, with the factory calibration set-tings already being memorized inside.The HD2103.2 instrument is a datalogger. It memorizes up to 38, 000 samples which can be transferred from the instrument connected to a PC via the multi-standard RS232C serial port and USB 2.0. The storing interval, printing, and baud rate can be confi gured using the menu.The HD2103.1 and HD2103.2 models are fi tted with an RS232C serial port and can transfer the acquired measurements in real time to a PC or to a portable printer. The Max, Min and Avg function calculate the maximum, minimum or aver-age values. Other functions include: the relative measurement REL, the HOLD function, and the automatic turning off that can also be disabled.The instruments have IP67 protection degree.
INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions ( Length x Width x Height) 185x90x40mm
Weight 470g ( complete with batteries) Materials ABS, rubber
Display 2x41D2 digits plus symbols Visible area: 52x42mm
Operating conditions
Operating temperature -5… 50° C Warehouse temperature -25… 65° C Working relative humidity 0… 90% RH without condensation
Protection degree IP67
Power Batteries 4 1.5V type AA batteries
Autonomy ( * ) 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20¼ A
Mains Output mains adapter 9Vdc / 250mA
Measuring units ° C - ° F - m/ s - km/ h - ft/ min - mph - knot - l/ s m3/ s - m3/ min - m3/ h - ft3/ s ft3/ min - WCT
Security of memorized data Unlimited, independent of battery charge conditions
Time Date and time Schedule in real time
Accuracy 1min/ month max departure Measured values memorization - model HD2103.2
Type 2000 pages containing 19 samples each
Quantity Total of 38000 samples Storage interval 1s… 3600s ( 1hour) Serial interface RS232C
Type RS232C electrically isolated
Baud rate Can be set from 1200 to 38400 baud
Data bit 8 Parity None Stop bit 1
Flow Control Xon/ Xoff
Serial cable length Max 15m Immediate print interval 1s… 3600s ( 1hour)
USB interface - model HD2103.2
Type 1.1 - 2.0 electrically isolated
Connections Input module for the probes 8-pole male DIN45326 connector
Serial interface and USB 8-pole MiniDin connector
Mains adapter 2-pole connector ( positive at centre) ( * ) It’ s referred to all the probes except the hot wire ones, which autonomy is stated in the next pages
Measurement of temperature by Instrument
Pt100 measurement range -200… + 650° C
Pt1000 measurement range -200… + 650° C
Ni1000 measurement range -50… + 250° C
Resolution 0.1° C
Accuracy ± 0.1° C
Drift after 1 year 0.1° C/ year
Common characteristics
Resolution 0.1° C
Temperature drift @ 20° C 0.003% / ° C
Common characteristics
Resolution 0.1° C
Temperature drift @ 20° C Pt100 0.003% / ° C Pt1000 0.005% / ° C

ORDER CODES
HD2103.1K: The kit is composed of the instrument HD2103.1, connection cable for serial output HD2110CSNM, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software. The probes must be ordered separately.
HD2103.2K: The kit is composed of the HD2103.2 datalogger, connection cable HD2101/ USB, 4 1.5V alkaline batteries, operating manual, case and Delta-Log9 software. The probes must be ordered separately.
HD2110CSNM: 8-pole connection cable MiniDin - Sub D 9-pole female for RS232C.
HD2101/ USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin.
DeltaLog9: Software for download and management of the data on PC using Windows 98 to XP operating systems.
AF209.60: Stabilized power supply at 230Vac/ 9Vdc-300mA mains voltage.
S’ print-BT: On request, portable, serial input, 24 column thermal printer, 58mm paper width.
Probes complete with SICRAM module
AIR speed measurement probes
Hot-wire PROBES:
AP471 S1: Hot-wire telescopic probe, measuring range: 0… 40m/ s. Cable length 2 metres.
AP471 S2: Omnidirectional hot-wire probe, measuring range: 0… 5m/ s. Cable length 2 metres.
AP471 S3: Hot-wire telescopic probe with terminal tip for easy position, measur-ing range: 0… 40m/ s. Cable length 2 metres.
AP471 S4: Omnidirectional hot-wire telescopic probe with base, measuring range: 0… 5m/ s. Cable length 2 metres.
AP471 S5: Omnidirectional hot-wire telescopic probe, measuring range: 0… 5m/ s. Cable length 2 metres.
Vane probes:
AP472 S1L: Vane probe with thermocouple, Ø 100mm. Speed from 0.6 to 20m/ s; temperature from -25 to 80° C. Cable length 2 metres.
AP472 S1H: Vane probe with thermocouple, Ø 100mm speed from 10 to 30m/ s; temperature from -25 to 80° C. Cable length 2 metres.
AP472 S2: Vane probe, Ø 60mm. Measurement range: 0.25… 20m/ s. Cable length 2 metres.
AP472 S4L: Vane probe, Ø 16mm. speed from 0.6 to 20m/ s. Cable length 2 metres.
AP472 S4LT: Vane probe with thermocouple, Ø 16mm, speed from 0.6 to 20m/ s. Temperature from -30 to 120° C with thermocouple K sensor( * ) . Cable length 2 metres.
AP472 S4H: Vane probe, Ø 16mm speed from 10 to 50m/ s. Cable length 2 metres.
AP472 S4HT: Vane probe with thermocouple, Ø 16mm speed from 10 to 50m/ s. Temperature from -30 to 120° C with thermocouple K sensor( * ) . Cable length 2 metres.
( * ) The temperature limit refers to the probe head, where the vane and tempera-ture sensors are located, and not to the handle, cable and telescopic rod that can withstand up to the maximum temperature of 80° C.
Temperature MEASUREMENT PROBES
TP472I: Immersion probe, Pt100 sensor. Stem Ø 3 mm, length 300 mm. Cable length 2 metres.
TP472I.0: Immersion probe, Pt100 sensor. Stem Ø 3 mm, length 230 mm. Cable length 2 metres.
TP473P.0: Penetration probe, Pt100 sensor. Stem Ø 4mm, length 150 mm. Cable length 2 metres.
TP474C.0: Contact probe, Pt100 sensor. Stem Ø 4mm, length 230mm, contact surface Ø 5mm. Cable length 2 metres.
TP475A.0: Air probe, Pt100 sensor. Stem Ø 4mm, length 230mm. Cable length 2 metres.
TP472I.5: Immersion probe, Pt100 sensor. Stem Ø 6mm, length 500 mm. Cable length 2 metres.
TP472I.10: Immersion probe, Pt100 sensor. Stem Ø 6mm, length 1000mm. Cable length 2 metres.
TP875: Globe thermometer Ø 150 mm with handle, complete with SICRAM module. Cable length 2 metres.
Temperature probes without SICRAM module
TP47.100: 4 wire direct Pt100 sensor immersion probe, . Probe’ s stem Ø 3mm, length 230mm. Connection cable 4 wires with connector, length 2 metres.
TP47.1000: Pt1000 sensor immersion probe. Probe’ s stem Ø 3mm, length 230mm. Connection cable 2 wires with connector, length 2 metres.
TP47: Only connector for probe connection: direct 4 wires Pt100 and 2 wires Pt1000.