HYGRO-THERMOMETERS HD2101.1 AND HD2101.2, Merk : DeltaOhm
Keterangan
The HD2101.1 and HD2101.2 are portable instruments with a large LCD display. They measure relative humidity and temperature using a Pt100 sensor or ther-mocouple humidity/temperature combined probe. Temperature only is measured by immersion, penetration or contact probes. The sensor can be a Pt100, Pt1000 or Ni1000.When the humidity/temperature combined probe is connected, the instrument calculates and displays the absolute humidity, the dew point, the partial vapour pressure, and the comfort indices.The probes are fi tted with an automatic detection module, with the factory calibra-tion settings already being memorized inside. The HD2101.2 is a datalogger. It stores up to 38,000 samples which can be transferred from the instrument connected to a PC via the multi-standard RS232C serial port and USB 2.0. The storing interval, printing, and baud rate can be confi gured using the menu.The HD2101.1 and HD2101.2 models are fi tted with an RS232C serial port and can transfer the acquired measurements in real time to a PC or to a portable printer.The Max, Min and Avg function calculate the maximum, minimum or average values. Other functions include: the relative measurement REL, the HOLD function, and the automatic turning off that can also be disabled.The instruments have IP67 protection degree.
INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions (Length x Width x Height) 185x90x40mm
Weight 470g (complete with batteries) Materials ABS, rubber
Display 2x41D2 digits plus symbols Visible area: 52x42mm
Operating conditions
Operating temperature -5…50°C Stocking temperature -25…65°C Working relative humidity 0…90%RH without condensation
Protection degree IP67
Power Batteries 4 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20¼A
Mains
Output mains adapter 9Vdc / 250mA
Measuring unit °C - °F - %RH - g/kg - g/m3 - hPa - J/g - Td Tw - DI - NET
Security of stored data Unlimited, independent of battery charge conditions
Time
Date and time Schedule in real time
Accuracy 1min/month max departure
Measured values storage - model HD2101.2
Type 2000 pages containing 19 samples each
Quantity Total of 38000 samples Storage interval 1s…3600s (1hour)
Serial interface RS232C
Type RS232C electrically isolated
Baud rate Can be set from 1200 to 38400 baud
Data bit 8 Parity None Stop bit 1
Flow Control Xon/Xoff
Serial cable length Max 15m Immediate print interval 1s…3600s (1hour)
USB interface - model HD2101.2
Type 1.1 - 2.0 electrically isolated
Connections
Input module for the probes 8-pole male DIN45326 connector
Serial interface and USB 8-pole MiniDin connector
Mains adapter 2-pole connector (positive at centre)
Measurement of relative humidity by Instrument
Measurement range 0…100%RH Resolution 0.1%RH
Accuracy ±0.1%RH
Drift after 1 year 0.1%RH/year
Measurement of temperature by Instrument
Pt100 measurement range -200…+650C
Pt1000 measurement range -200…+650°C
Ni1000 measurement range -50…+250°C
Resolution 0.1°C
Accuracy ±0.1°C
Drift after 1 year 0.1°C/year
Common characteristics
Resolution 0.1°C
Temperature drift @ 20°C 0.003%/°C
Common characteristics
Relative humidity
Sensor Capacitive Typical
capacity @30%RH 300pF±40pF
Resolution 0.1%RH
Temperature drift @ 20°C 0.02%RH/°C
Response time %RH at constant temperature 10sec (10÷80%RH; air speed=2m/s)
Temperature with sensor Pt100 Resolution 0.1°C
Temperature drift @ 20°C 0.003%/°C
Temperature with thermocouple K - HP572AC
Resolution 0.1°C
Temperature drift @ 20°C 0.02%/°C
Common characteristics
Resolution 0.1°C
Temperature drift @ 20°C  Pt100 0.003%/°C Pt1000 0.005%/°C
ORDER CODES
HD2101.1K:Â The kit is composed of the instrument HD2101.1, combined probe HP472AC, connection cable for serial output HD2110CSNM, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software.
HD2101.2K:Â The kit is composed of the HD2101.2 datalogger, combined probe HP472AC, connection cable HD2101/USB, 4 1.5V alkaline batteries, oper-ating manual, case and DeltaLog9 software.
HD2110CSNM:Â 8-pole connection cable MiniDin - Sub D 9-pole female for RS232C.
HD2101/USB: Connection cable USB 2.0 connector type A - 8-pole MiniDin.
DeltaLog9:Â Software for download and management of the data on PC using Windows 98 to XP operating systems.
AF209.60:Â Stabilized power supply at 230Vac/9Vdc-300mA mains voltage.
S’print-BT: On request, portable, serial input, 24 column thermal printer, 58mm paper width.
Probes complete with SICRAM module TEMPERATURE MEASUREMENT
TP472I: Immersion probe, sensor Pt100. Stem Ø 3mm, length 300mm. Cable length 2 metres.
TP472I.0: Immersion probe, sensor Pt100. Stem 3mm, length 230mm. Cable length 2 metres.
TP473P.0: Penetration probe, sensor Pt100. Stem 4mm, length 150mm. Cable length 2 metres.
TP474C.0: Contact probe, sensor Pt100. Stem 4mm, length 230mm, contact surface 5mm. Cable length 2 metres.
TP475A.0: Air probe, sensor Pt100. Stem 4mm, length 230mm. Cable length 2 metres.
TP472I.5: Immersion probe, sensor Pt100. Stem Ø 6mm, length 500mm. Cable length 2 metres.
TP472I.10: Immersion probe, sensor Pt100. Stem Ø 6mm, length 1,000mm. Cable length 2 metres.
RELATIVE HUMIDITY AND TEMPERATURE PROBES
HP472AC: Combined probe %RH and temperature, dimensions 26x170mm. Connection cable length 2 metres.
HP572AC: Combined probe %RH and temperature - thermocouple K sensor. Dimensions Ø 26x170mm. Connection cable length 2 metres.
HP473AC: Combined probe %RH and temperature. Handle dimensions 26x130mm, probe 14x110mm. Connection cable length 2 metres.
HP474AC: Combined probe %RH and temperature. Handle dimensions 26x130mm, probe 14x210mm. Connection cable length 2 metres.
HP475AC: Combined probe %RH and temperature. Connection cable length 2 metres. Handle 26x110mm. Stainless steel stem 12x560mm. Point 13.5x75mm.
HP477DC: Combined sword probe %RH and temperature. Connection cable length 2 metres. Handle 26x110mm. Probe’s stem 18x4mm, length 520mm.
Temperature probes without SICRAM module
TP47.100: Immersion probe sensor Pt100 direct 4 wires. Probe’s stem Ø 3mm, length 230mm. 4 wire connection cable with connector, length 2 metres.
TP47.1000: Immersion probe sensor Pt1000. Probe’s stem Ø 3mm, length 230mm. Connection cable 2 wires with connector, length 2 metres.
TP47: Only connector for probe connection: direct 4 wire Pt100, 2 wire Pt1000 and 2 wire Ni1000.
Accessories
HD11: Saturated solution at 11.3%RH@20°C for calibration of relative humidity probes, fi xing adapter M24x1.5
HD33: Saturated solution at 33.0%RH@20°C for calibration of relative humidity probes, fi xing adapter M24x1.5
HD75: Saturated solution at 75.4%RH@20°C for calibration of relative humidity probes, fi xing adapter M24x1.5
Protection for humidity probes HP472AC, HP572AC (M24x1,5)P1: Stainless steel grid protection for probes Ø 26 mm.
P2: 20¼ sintered polyethylene PE protection for probes Ø 26 mm. P3: 20¼ sintered bronze protection for probes Ø 26 mm.
P4: 20¼ sintered PE complete cap for probes Ø 26 mm.
Protection for humidity probes HP473AC, HP474AC, HP475AC (M12x1)P5: Stainless steel grid protection for probes Ø 14 mm.
P6: 20¼m sintered complete protection made of stainless steel for probes Ø 14 mm.
P7: 10¼m sintered complete protection made of PFTE for probes Ø 14 mm.