JENCO In-line pH Meters pH, ORP In-line Controller 3679N

Jumlah Pesanan:

Negara Asal:

Amerika Serikat

Cara Pembayaran:

Transfer Bank (T/T)

Kemas & Pengiriman:

1 unit

Description
1/ 4 DIN panel mount pH/ ORP controller/ transmitter in a waterproof IP-65 enclosure. Features, LCD display, dual SPDT Hi/ Lo relays, manual set point adjust and pH calibration via potentiometers. For ORP there is a Zero Adjustment and pH/ ORP is selectable via a shorting plug. Output is 4-20 mA current type. Connectors are a spade lug circular connector for pH+ . All other connections are tinned leads to terminal blocks. Temperature compensation is a Pt-100 ATC or simulation resistor. Power 115/ 230V AC.

* Dual function pH & ORP
* Orp zero point calibration
* Isolated 4~ 20ma output
* Dual on/ off relays
* Auto temperature compensation
* Water & corrosion proof case
* Large led display

Specifications
pH
Range : 0.00 to 14.00 pH Resolution : 0.01 pH
Accuracy : 0.1% ± 1 LSD
ORP
Range : -1999 to 1999 mV
Resolution : 1 mV
Accuracy : 0.05% ± 1 LSD

#
Outputs

* Relays output ( max.) : 5amp. at 115VAC, 2.5 amp. at 230 VAC, resistive lo
* Relay hysteresis pH/ ORP: ± 0.1ph/ ± 10 mV
* Isolated 4~ 20mA output range: Over imput span
* Accuracy: 0.1 % of span
* Isolation voltage: 500VDC max.
* Load resistance: 500 ohm max.

Controller Input Range

* Relay outputs: Over imput span
* Current output pH/ ORP: 0.00~ 14.00ph / 0~ 1400mV

General

* Input impedance: > = 10exp( 13) ohm
* Temperature compensation: Auto 0 to 100° C
* Temperature sensor: Pt-100, a= 0.00385
* pH zero point control: ± 2.0 pH
* ORP zero point control: ± 100mV
* Display: 12.7 mm high LCD
* Power: 115VAC, 230VAC ± 15% , 50/ 60 hz
* Weight: 910 gm
* Dimension: 96mm ( l) x 96mm ( w) x 171mm ( d)
* Cutout size: 92 mm x 92 mm

Kenalkan ke teman Anda