Katalog Produk

Keterangan

Model 401XLC1 has a capacity of 4000 pounds per hour using a 3/ 8" diameter perforated screen plate; 2500 pounds using a 3/ 16" diameter screen. It is recommended for crushing 6-inch and smaller material to minus-4 mesh.

Features

The covered feed hopper with a capacity of 1.6 cubic feet ( 70 lb) has a manual-feed control gate.
The cast ductile iron-crusher housings are hinged and latched for quick access.
Stressing safety in operation, its open latch sensor cuts power to the motor.
The rotor swing-hammers are heat-treated and hardened.
Rotor assemblies are reversible ( end-for-end) for maximum hammer life.
Screen plates have round-hole perforations. Available perforation diameters are ( in inches) 1/ 8, 3/ 16, 1/ 4, 5/ 16, 3/ 8, 1/ 2, 3/ 4, and 1.
The container is sealed to the discharge spout while crushing.
The Nema-12 magnetic starter provides a 120-volt control circuit and overload protection for the 7-1/ 2 HP, TEFC motor, 575V, 3 phase, 60Hz motor.
The rotor speed is 1260 rpm.
Overall Size: 56" H x 36" W x 39 1/ 2" D; Shipping Weight: 840 lb
The crusher is mounted on four 4-inch diameter casters.
Wired to NEC standards. Other wiring configurations are available.

Supplied with

Two screen plates
About 10 feet of cable to connect to the power source