Katalog Produk

Keterangan

Model 201XL has a capacity of 1000 pounds of coal per hour using a 3/ 16" diameter perforated screen plate; 500 pounds using a 1/ 16" diameter screen. It is recommended for crushing 2-inch and smaller material.

Features

The covered feed hopper has a capacity of 0.40 cubic feet ( 20 pounds) and a manual-feed control gate.
The cast ductile iron crusher housings are hinged and latched for quick access.
Stressing safety in operation, its open latch sensor cuts power to the motor.
The rotor-swing hammers are heat-treated and hardened.
Rotor assemblies are reversible ( end-for-end) for maximum hammer life.
Screen plates have round-hole perforations. Available perforation diameters are ( in inches) 1/ 16, 3/ 32, 1/ 8, 3/ 16, 1/ 4, 3/ 8, and 1/ 2.
The container is sealed to the discharge spout while crushing.
The Nema-12 magnetic starter provides a 120-volt control circuit and overload protection for the 2 HP, TEFC, 230V, 3 phase, 60Hz motor.
The rotor speed is about 3450 rpm
Overall Size: 43" H x 25" W x 28" D; Shipping Weight: 340 lb
The crusher is mounted on four 2 1/ 2-inch diameter casters.
Wired per NEC standards. Other wiring configurations are available.

Supplied with

Two containers - 10 lb ( 4.5 kg) and 35 lb ( 16 kg) capacities.
Two screen plates - 3/ 16" and 1/ 16" or customer specifications
About 10 feet of cable to connect to the power source.

Additional Models

Catalog Number Volts/ Phase/ Hertz
91-6730-01 230/ 3/ 60
91-6730-02 230/ 1/ 50
91-6730-03 230/ 1/ 60
91-6730-04 480/ 3/ 60
91-6730-05 575/ 3/ 60
91-6730-06 208/ 3/ 60
91-6730-07 230/ 3/ 50
91-6730-08 230/ 3/ 60 Explosion Proof
91-6730-09 380/ 3/ 50
91-6730-10 115/ 1/ 60