Elcometer 208 & 208DL Ultrasonic Thickness Gauges

Jumlah Pesanan:

Rugged & repeatable hand held gauges designed to non destructively measure the thickness of metal substrates whilst ignoring the thickness of up to 2mm ( 80mils) of an applied coating ( Echo to Echo mode) .
T92016967 5MHz High Damped Transducer - Steel Applications
T92016968 7.5MHz High Damped Transducer - Aluminium, Stainless Steel & Titanium Applications

Supplied with or without data logging, each gauge can be used with the wide range of measurement transducers and is supplied with a wide range of functionality including Scan mode and Alarm mode.

Elcometer 208DL only - ElcoMasterâ„¢

Select from transducer options

Definitions:

Echo-to-Echo Mode:
Measuring materials as thin as 0.15mm ( 0.006� ) the Echo-to-Echo mode ignores the thickness of any coating applied to the surface under inspection.

Scan Mode:
Measuring up to 16 readings per second, the gauge captures the minimum recorded thickness.

Alarm Mode:
Once a minimum acceptable thickness has been set, a red LED illuminates and a buzzer sounds if a measurement falls below the preset value.

Kenalkan ke teman Anda