Orbital Mixing Chilling/Heating Dry Bath MODEL SC 20 TORREY PINES SCIENTIFIC[29 Mar. 2009, 20:54:49]
Keterangan
Model SC20 Features:
Orbital mixing with speeds from 200 to 1000 rpm
Energy efficient Peltier design
Digital control to 1°C from -10°C to 100°C
Control at room temperature
30-day count down timer with audible alarm and user settable Auto-Off
RS232 I/O port for control or data collection
Built-in data logger
Electronic calibration
Small compact size uses very little bench space
12 volt DC operation. Universal power supply provided
UL, CSA and CE compliant
Some SC20 Applications
Mixing samples in centrifuge tubes, assay plates, PCR plates, vials, test tubes or other containers while heating or chilling
Maintaining 14°C for ligation reaction
Maintaining 17°C for storing oocytes
Storing samples at ice bucket temperatures without the mess
Incubating samples at 37°C
Storing enzyme or DNA libraries at your workstation
Enzyme reactions and deactivations
Product Description:
Torrey Pines Scientific, Inc. Model SC20 Orbital Mixing Chilling/Heating Dry Baths are compact, completely solid state, versatile, reliable, and easy to use. They feature a built-in orbital mixer with 9 digitally preset speeds varying incrementally from 200 to 1000 rpm. The orbital mixer is designed with friction free hardened, blued, tempered steel leaf spring bearings that support the plate and sample blocks. The units have a temperature range from -10°C to
100°C at the plate surface. They have an I/O port for recording data or for controlling the unit from a computer. The built-in data logger can store 8110 data points in 1 second, 1 minute or 5 minute intervals. The units also have a built-in 30-day timer with alarm and a user settable Auto-Off function that will turn off the chiller/heater after any count down timed event.
The SC20 has simple digital controls and a backlit two-line alphanumeric display for easy viewing. The display shows target and actual temperature and orbital mixing speed. The display will add the timer readout if in use. The SC20 chilling/heating surface is 2.875â (7.3 cm) x 4.375â (11.1 cm) aluminum plate that is very flat for good contact with the sample blocks. When unloaded the plate will reach below 0°C in under two minutes and will heat to 37°C in under one minute. These chilling /heating rates will vary with load. For instance, temperatures to 4°C can be reached on sample blocks as large as 4â (10.2 cm) x 3â (7.6 cm) x 6â (15.2 cm) in about a half hour.
The units are complete with instruction manual, universal bench top power supply for use anywhere in the world and AC line cord for the country of use. Sample blocks and covers are available as accessories.
Product Specification:
Orbital Mixing:
Range : 200 to 1000 rpm in increments : of 100 rpm
Readability : 0 through 9 digitally in increments : on 1
Temperature:
Range : -10°C to 100°C
Readability : 1 °C
Accuracy : ±1 °C
Stability : ±1 °C
Sensor Platinum : RTD
Controller : Type PID
Uniformity : ±0.5 °C
Timer:
Range : 00:01 to 30 days
Readability : 1 second
Audible : Alarm Yes, sounds for 1 minute. Timer counts up until turned off.
Auto-Off Yes, user settable.
Data Logger:
Sample times :
1 sec, 1 min, or 5 minutes per data point
Capability : 8110 data points
Electrical:
Heater/Chiller :
50 Watts
Operating Voltages : 100 to 265 VAC, 50/60 Hz input to power supply. 12 VDC into instrument
Power Consumption : 50 watts
Power Switch : Yes
Dimensions:
Chilling/Heating Module
Width : 7.75â (3.05 cm)
Depth : 14.5â (5.7 cm)
Height : 4.25â (1.67 cm) tall without sample block
Weight :
10 pounds (4.5 kg)
Power Supply :
Length : 6.5â (16.5 cm)
Height : 3.2" (8.1 cm)
Width : 2.2" (5.6 cm)
Weight (power supply & chiller/heater module) :
12 pounds (5.4 kg)
Accessories Available:
620-5012 Block, aluminum, 40 holes for 0.5 ml centrifuge tubes.
620-5013 Block, aluminum, 30 holes for 1.5 ml centrifuge tubes.
620-5014 Block, aluminum, 40 holes for 0.5 ml and 15 holes for 1.5 ml
620-5015 Block, aluminum, 96 holes for 0.2 ml PCR tubes spaced for 8 and 12 tube strips.
620-5016 Block, aluminum, for "V" bottom 96-well assay plates
620-5017 Block, aluminum, for round bottom 96-well assay plates
620-5018 Block, aluminum, 24 holes for 2.0 ml vials
620-5019 Block, aluminum, 384 holes for 384-well assay plates
620-5020 Block, aluminum, for flat bottom 96 and 384-well assay plates
620-5021 Block, aluminum, 24 holes for 10 mm test tubes
620-5022 Block, aluminum, 12 holes for 15/16 mm test tubes
620-5023 Block, aluminum, 20 holes for 12/13 mm test tubes
620-5024 Block, aluminum, mixed holes for various sized test tubes
620-5025 Block, aluminum, 8 holes for 20 mm test tubes
620-5026 Block, aluminum, 30 holes for 6 mm test tubes
620-5027 Block, aluminum, 12 holes for 15ml centrifuge tubes
620-5028 Block, aluminum, 12 holes for 20ml scintillation vials
620-5030 Block, aluminum, 6 holes for 50ml centrifuge tubes
620-5031 Block, Aluminum, 4-slides for hybridizations, with black cover
620-5032 Block, Aluminum for 30-2.0ml Eppendorf centrifuge tubes
720-0008 Cover, assay plates and all assay plate blocks, 1.75" high
720-0009 Cover, aluminum blocks, 3.25" high