Keterangan :

Flow Rate Range:
Pipe Size:
Accuracy:
Display:
Calibration:
Power Input:
Output:
Control Relays:
Enclosure:
Electronics Operating Temperature:
Sensitivity:
Electrical Surge Protection:
Shipping Weight:
Model SE4
Sensor Operating Temperature:
Sensors:
Sensor Cable:
Enclosure Heater:
Data Logger:
Power input:
Control Relays:
Recommended for:
Sensor Mounting Location:
Pipe Materials:
± 0.1 to 40 ft/ sec ( ± 0.03 to 12.2 m/ sec) in most applications
Any pipe ID from ½ " to 180" ( 12.7 mm to 4.5 m)
± 2% of scale. Requires solids or bubbles minimum size of 100 microns, minimum
concentration 75 ppm. Repeatability: ± 0.1% , Linearity ± 0.5% of full scale
White, backlit matrix - displays flow rate, relay states, 16-digit totalizer, operating
mode and calibration menu
built-in 5-key calibrator with English, French or Spanish language selection
100-240VAC 50-60Hz ( see Options) , 5 Watts maximum ( with standard features)
Isolated 4-20mA ( 1000 ohm load max.)
Qty 2, rated 5 amp SPDT, programmable flow alarm and/ or proportional pulse
watertight, dust tight NEMA4X ( IP 66) polyester with a clear polycarbonate face
-10° to 140° F ( -23° to 60° C)
adjustable. Damping: adjustable
Sensor, 4-20mA output and AC power input
14 lbs ( 6.3 kg)
single-head ultrasonic with 20 ft ( 6 m) shielded cable and stainless steel mounting
kit for pipes ½ " ( 12.7 mm) ID or larger. Designed to withstand accidental submersion to 10 psi.
Certified non-incendive for Class I Division 2, Groups A, B, C, D hazardous locations
-40° to 300° F ( -40° to 150° C)
Intrinsic Safety Barriers for Sensor mounting in Class 1 Div.1 hazardous locations
50 ft. ( 15 m) or 100 ft. ( 30 m) continuous shielded coaxial pair, or splice up to
500 ft ( 152 m) with Junction Box. Self tunes to extended cable
for outdoor installation, 16 watt thermostatically controlled to -40° F ( -40° C)
Built-in 2 million point logger with USB output and Windowsâ„¢ software
9-32VDC
4 additional ( 6 total) rated 5 ampere SPDT
liquids containing suspended solids or bubbles minimum size of 100
microns, minimum concentration 75 ppm. Sensor mounts on Vertical or Horizontal pipes
6-10 pipe diameters from elbows, tees ( turbulence increasing
devices) and > 30 pipe diameters from pumps, controlling valves and pipe discharge
steel, stainless steel, cast iron, PVC, fiberglass, any contiguous pipe material
that conducts sound, including lined pipes with liner bonded to pipe wall. Avoid pipes with loose
insertion liners and pipe walls which contain air ( concrete, wood etc