KYORITSU 2412R, Leakage Clamp Meters[19 Nov. 2010, 4:22:13]
Keterangan
Model : 2412R
• Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires ( 3 phases) together for leakage current measurement.
• True RMS enables an accurate measurement for distorted waveforms.
• Measurement from mA up to
AC 1000A
• Frequency filter switch to eliminate the effect of the harmonics.
• 2 way analogue output terminal:
AC current detected by transformer jaws is converted to AC and DC voltage. Output cord model 7073 ( option) is used for monitoring waveform with an oscilloscope or for connecting to a recorder.
• Peak hold function ( Response time is selectable for 10ms or 100ms.)
• Data hold function: Allows for easy reading in dimly light or hard-to-reach locations
• Back light in the LCD ( Automatically off)
• International safety standard IEC 61010-1 CAT.III 300V
AC A
( 50/ 60Hz) : 200mA/ 2/ 20/ 200/ 1000A
| ± 2.5% rdg± 5dgt ( 200mA/ 2/ 20A)
| ± 3.0% rdg± 5dgt ( 200A, 0~ 500A)
| ± 5.5% rdg ( 501~ 1000A)
AC A
( WIDE) : 200mA/ 2/ 20/ 200/ 1000A
| ± 1.8% rdg± 5dgt ( 50/ 60Hz) ( 200mA/ 2/ 20A)
| ± 2.0% rdg± 5dgt ( 50/ 60Hz) ( 200A, 0~ 500A)
| ± 5.0% rdg ( 50/ 60Hz) ( 501~ 1000A)
Conductor Size : Ø 68mm max.
Frequency Response : 40Hz~ 1kHz
Analogue Output : AC/ DC 200mV against 2000 count reading
( 100mV at the 1000A range)
Crest Factor : 3.0 or less
Withstand Voltage : 3700V AC for 1 minute
Applicable Standard : IEC 61010-1 CAT.III 300V Pollution degree 2
IEC 61010-2-032
Power Source : 6F22 ( 9V) × 1 * Continuous measuring time: Approx. 60 hours
Dimensions : 250( L) × 130( W) × 50( D) mm
Weight : Approx. 600g ( including battery)
Accessories : 9094 ( Carrying Case)
6F22 × 1
Instruction Manual
Optional : 7073 ( 2WAY Output Cord)
