Katalog Produk

Keterangan

RYC Unit:
Diagram in the front panel with similar distribution that the elements in the real unit.
Steel box.
3 Modules of Controller of 1st Order.
3 Modules of Integrator.
2 Modules of Inverter Amplifier.
Module of Inverter Reductor.
Module of Negative Zero.
Module of Positive Zero.
Module of Hysteresis.
Module of Limiter.
Module of Controller of 2nd Order.
Module of Adding.
14 Capacitors from 1mF to 100mF.
6 Diodes.
34 Operational Amplifiers.
33 Potentiometers.
186 Resistances.
2 Transistors.
On/Off switch.
Fuse.
Connector to PC.
Control Interface.
2 DAB. Data Acquisition Board:
PCI Data acquisition board (National Instruments) to be placed in a computer slot.
Bus PCI.
Analog input:
Number of channels= 16 single-ended or 8 differential.
Resolution=16 bits, 1 in 65536.
Max. Sampling rate up to: 250 KS/s (Kilo samples per second).
Input range (V)= ± 10V.
Data transfers=DMA, interrupts, programmed I/0.
Number of DMA channels=6.
Analog output:
Number of channels=2.
Resolution=16 bits, 1 in 65536.
Maximum output rate up to: 833 KS/s.
Output range(V)= ± 10.
Data transfers=DMA, interrupts, programmed I/0.
Digital Input/Output:
Number of channels=24 inputs/outputs.
D0 or DI Sample Clock frequency: 0 to 1 MHz.
Timing:
Counter/timers=2.
Resolution:
Counter/timers: 32 bits.
3 RYC/CCSOF. Computer Control+Data Acquisition+Data Management Software:
Compatible with all actual Windows operating systems. Graphic and intuitive simulation of the process in screen. Compatible with the industry standards.
Registration and visualization of all process variables in an automatic and simultaneously way.
Flexible open and multicontrol software, developed with actual windows graphic systems, acting simultaneously on all process parameters.
Management, processing, comparison and storage of data.
Sampling velocity up to 250,000 data per second.
Comparative analysis of the obtained data, after to the process and modification of the conditions during the process.

4 Cables and Accessories.
5 Manuals:
This unit is supplied with 8 manuals: Required Services, Assembly and Installation, Interface and Control Software, Starting-up, Safety, Maintenance, Calibration & Practices Manuals.

*References 1 to 5: RYC + DAB +RYC/CCSOF + Cables and Accessories + Manuals are included in the minimum supply, enabling a normal operation.

Complementary items to the standard supply

Simulation Software:

5 RYC/SOF. Regulation and Control Simulation Software Package.

EXERCISES AND PRACTICAL POSSIBILITIES
Practical Possibilities of the unit:

1.- Study in open loop Nº1: Proportional Block.
2.- Study in open loop Nº2: Integrative Block.
3.- Study in open loop Nº3: Simple pole.
4.- Study in open loop Nº4: Second order plants.
5.- Study in open loop Nº5: Non-linear plants: Limitation and Hysteresis.
6.- Study in open loop Nº6: Blocks Composition: Negative Zero and Negative Pole.
7.- Study in closed loop Nº1: Control by means of Quantitative Optimum 1st order system.
8.- Study in closed loop Nº2: Control by means of Quantitative Optimum 2nd order system.
Other practical possibilities:
Analog regulators procedure: (9-11):
9.- First order filter.
10.-Integral regulator.
11.-Regulating I+P with phase advance in the feedback.
12.-Potentiometer adjustment. Masukan ke Produk RekananKenalkan ke teman Anda