PT. Taharica ( Distributor, Agent, Service)

Measurement and(10 Jan. 2011, 2:37:00)

Harga	Bersaing
Jumlah Pesanan:	Tambah ke Keranjang
Kemas & Pengiriman	Sesuai pesanan
Negara Asal	Amerika Serikat

Keterangan

EPC-96AC
Simultaneous display of setting values and parameter setting values.
Being able to call up settings and setting values while checking measures provides greater convenience. This also makes operation simpler.
One-touch calibration
Just insert the electrode into a standard solution and press the CAL key. The microprocessor recognizes the type of standard solution and then the potential stability determination function automatically performs calibration to match the temperature characteristics of the standard solution. In addition, manual calibration can also be performed by changing the panel switch position.
Flexible power source
Supports a wide range of voltages from AC 90 to 260 V.
Functions as both a pH and ORP meter
Can be used as either a pH meter or an ORP meter by changing the panel switch position.
Memory backup
Data on the settings and calibration values is stored inside the meter each time it is updated. So it is not lost even when the power is turned off. When the power is turned on again, measurement is started using the data stored in memory.
Wide transmission power range
The transmission power scope can be selected from 8 ranges for pH and 8 ranges for ORP.
Automatic determination of whether electrode characteristics are good/ bad
When calibration is performed, the meter uses the asymmetry potential, sensitivity, and reaction speed to automatically determine whether the electrode is good or bad, and then displays a corresponding error message. During measurement, error messages, such as outside measurement range error, temperature sensor short-circuit, circuit open, etc., are displayed.
Simple and accurate operation.