PT. MBT UTAMA ALAT LAB ( 085222177772 / 022-61156261)

http://indotrade.com/pt_mbt_utama_alatlab

PT. MBT Mektan Babakan Tujuh utama ( since 1974) 085.2221.77772 adalah Produsen Alat Lab. Teknik Sipil, memproduksi & menyediakan kebutuhan peralatan laboratorium pengujian Tanah, Beton, Aspal, Alat preparasi pertambangan Batubara, Nikel, dll.

â € ¢ Alat Lab Teknik Sipil ( Bidang Konstruksi)
Bermanfaat untuk menjamin kualitas konstruksi agar sesuai dengan spesifikasi dan standar mutu yang ditetapkan melalui penerapan pengendalian/ pengawasan mutu sejak perencanaan teknis hingga pelaksaan proyek melalui penerapan quality control.

â € ¢ Alat Lab Teknik Sipil ( Bidang Pendidikan)
Bermanfaat untuk memberikan bekal kepada siswa/ mahasiswa untuk mengenal, mengetahui, dan memahami alat laboratorium baik jenis maupun cara kerjanya.

â € ¢ Alat Lab Teknik Sipil ( Bidang Pengawasan Pembangunan/ Inspektorat)
Merupakan alat untuk dalam pengawasan dan pemeriksaan mutu suatu pekerjaan sipil. Pada saat ini terdapat gejala/ kecenderungan ( oleh oknum) akan tidak konsistennya perencanaan teknis, di mana terlihat dari fenomena hasil pembangunan yang ternyata cepat rusak dan umur teknisnya ternyata lebih pendek dari umur rencana.

Produk perusahaan kami meliputi :

SOIL TEST EQUIPMENT ( Lab. Uji Mekanika Tanah/ Mektan) :
- HAND BOR ( SO-110A)
- STANDARD PENETRATION TEST ( SPT) , Astm D-1586/ Aashto T-206 ( SO-130A)
- SAMPLE EXTRUDER ( SO-140)
- SAMPLE EXTRUDER, Electric ( SO-145)
- DYNAMIC CONE PENETROMETER/ DCP ( SO-150)
- TUBE DENSITY SAMPLER, Astm D-2573 ( SO-160)
- CORPS OF ENGINEER SOIL SURFACE SAMPLER, Astm D-2937 ( SO-170)
- DUTCH CONE PENETROMETER/ Sondir 2.5 Ton, Astm D-3441( SO-200)
- DUTCH CONE PENETROMETER/ Sondir 5 Ton, Astm D-3441 ( SO-210)
- HYDRAULIC CONE PENETROMETER/ Sondir Hydrolik 2.5 Ton, Astm D-3441 ( SO-200HD)
- HYDRAULIC CONE PENETROMETER/ Sondir Hidrolik 5 Ton, Astm D-3441 ( SO-210HD)
- HYDRAULIC CONE PENETROMETER/ Sondir Hidrolik 10 Ton, Astm D-3441 ( SO-700HD)
- PLATE BEARING TEST SET, Astm D-1194/ Aashto T-235 ( SO-250)
- FIELD CBR TEST SET, Astm D-4429 ( SO-260)
- PROVING RING PENETROMETER ( SO-270)
- TVA PENETROMETER ( SO-280)
- ATTERBERGH LIMIT ( SO-310, SO-315, SO-320)
- LIQUID LIMIT TEST SET, Astm D-4318/ Aashto T-89 ( SO-310)
- LIQUID LIMIT DEVICE, Hand Operated, Astm D-4318/ Aashto T-89 ( SO-311A)
- LIQUID LIMIT DEVICE, Electric, Astm D-4318/ Aashto T-89 ( SO-311B)
- PLASTIC LIMIT TEST SET, Astm D-4318/ Aashto T-90 ( SO-315)
- SHRINKAGE LIMIT TEST SET, Astm D-427/ Aashto T-92 ( SO-320)
- HYDROMETER ANALYSIS TEST SET, Astm D-422/ Aashto T-88 ( SO-330A)
- MECHANICAL END OVER END SHAKER, BS-1377 ( SO-338)
- VACUUM STAND, With 6 Flask Capacity ( SO-339A)
- SPECIFIC GRAVITY Heating Method ( SO-340)
- SPECIFIC GRAVITY Vacuum Method, Astm D-854/ Aashto T-100 ( SO-340A)
- SPECIFIC GRAVITY Vacuum Method, Astm D-854/ Aashto T-100 ( SO-340B)
- COMPACTION TEST SET, Astm D-698/ D-1557/ T-99/ T-180 ( SO-350)
- LABORATORY CBR TEST SET Electric Astm D-1883/ Aashto T-193 ( SO-360A)
- LABORATORY CBR TEST SET, Astm D-1883/ Aashto T-193 ( SO-360B)
- COMBINATION PERMEAMETER, Astm D-2434/ Aashto T-215 ( SO-370)
- COMPACTION PERMEAMETER TEST SET 1/ 30 cu.ft ( SO-390A)
- COMPACTION PERMEAMETER TEST SET 1/ 13.33 cu.ft ( SO-395A)
- SAND CONE TEST SET, Astm D-1556/ Aashto T-191 ( SO-400)
- SPEEDY MOISTURE TESTER, Aashto T-217 ( SO-430)
- MOISTURE CONTENT TEST SET ( SO-450)
- UNCONFINED COMPRESSION MACHINE, Astm D-2166/ Aashto T-208 ( SO-500)
- UNCONFINED COMPRESSION MACHINE Electric, Astm D-2166/ Aashto T-208 ( SO-500A)
- CONSOLIDATION TEST SET, Astm D-2435/ Aashto T-216 ( SO-515)
- DIRECT SHEAR TEST SET, Astm D-3080/ Aashto T-236 ( SO-525)
- ELECTRIC DIRECT SHEAR TEST SET, Astm D-3080/ Aashto T-236 ( SO-525E)
- TRIAXIAL TEST SET/ CU, UU, CD test methode, Astm D-2850 ( SO-600) Digital reading for PP value
- TRIAXIAL TEST SET/ CU, UU, CD test methode ( SO-550) , Astm D-2850 Mercury manometer reading for PP value

AGGREGATE EQUIPMENT TEST ( Lab. Uji Bahan/ Mektan) :
- SAMPLE SPLITER 1/ 2inch, 12 holes, 1/ 2 inch chute width ( AG-100)
- SAMPLE SPLITER 3/ 4 inch, 12 holes, 3/ 4 inch chute width ( AG-101)
- SAMPLE SPLITER 1 inch, 12 holes, 1 inch chute width ( AG-102)
- SAMPLE SPLITER 1-1/ 2, inch 12 holes, 1-1/ 2 inch chute width ( AG-103)
- SAMPLE SPLITER 2 inch, 12 holes, 2 inch chute width ( AG-104)
- SAMPLE SPLITER 2 1/ 2 inch, 12 holes, 2 1/ 2 inch chute width ( AG-105)
- SAMPLE SPLITER 3 " inch, 12 holes, 3 inch chute width ( AG-106)
- GILSON SAMPLE SPLITTER, Varieble chute width, 1/ 2 " increment ( AG-111)
- PRECISSION SAMPLE SPLITTER, chute width 1/ 4 " x 32 holes ( AG-122)
- PRECISSION SAMPLE SPLITTER, chute width 1/ 4 " x 16 holes ( AG-123)
- LENGTH GAUGE BS-812 ( AG-170)
- THICKNESS GAUGE BS-812 ( AG-180)
- STANDAR SIEVE ( Brass Round Sieve 8 inch Diameter)
- Sieve Analisis - Gradation Test
- SIEVE 4 " ; mesh 101.6 mm opening, 8 inch dia. ( AG-200A)
- SIEVE 3 1/ 2 " ; mesh 88.9 mm opening, 8 inch dia.( 201A)
- SIEVE 2 1/ 2 " ; mesh 62.5 mm opening, 8 inch dia. ( AG-203A)
- SIEVE 2 " ; mesh 50.8 mm opening, 8 inch dia. ( AG-204A)
- SIEVE 1 3/ 4 " ; mesh 44.4 mm opening, 8 inch dia. ( AG-205A)
- SIEVE 1 1/ 2 " ; mesh 38.1 mm opening, 8 inch dia. ( AG-206A)
- SIEVE 1 1/ 4 " ; mesh 31.7 mm opening, 8 inch dia. ( AG-207A)
- SIEVE 1 " ; mesh 25.4 mm opening, 8 inch dia. ( AG-208A )
- SIEVE 7/ 8 " ; mesh 22.2 mm opening, 8 inch dia. ( AG-209A)
- SIEVE 3/ 4 " ; mesh 19.0 mm opening, 8 inch dia. ( AG-210A)
- SIEVE 5/ 8 " ; mesh 15.8 mm opening, 8 inch dia. ( AG-211A)
- SIEVE 1/ 2 " ; mesh 12.7 mm opening, 8 inch dia ( AG-212A)
- SIEVE 7/ 16 " ; mesh 11.1 mm opening, 8 inch dia. ( AG-213A)
- SIEVE 3/ 8 " ; mesh 9.5 mm opening, 8 inch dia. ( AG-214A)
- SIEVE 5/ 16 " ; mesh 7.9 mm opening, 8 inch dia. ( AG-215A)
- SIEVE 1/ 4 " ; mesh 6.3 mm opening, 8 inch dia. ( AG-216A)
- SIEVE # 4; mesh 4.75 mm opening, 8 inch dia. ( AG-218A)
- SIEVE # 8; mesh 2.36 mm opening, 8 inch dia. ( AG-222A)
- SIEVE # 10; mesh 2.00 mm opening, 8 inch dia. ( AG-223A)
- SIEVE # 12; mesh 1.70 mm opening, 8 inch dia. ( AG-224A)
- SIEVE # 16; mesh 1.18 mm opening, 8 inch dia. ( AG-226A)
- SIEVE # 20; mesh 0.850 mm opening, 8 inch dia. ( AG-228A)
- SIEVE # 30; mesh 0.600 mm opening, 8 inch dia.( AG-230A)
- SIEVE # 40; mesh 0.425 mm opening, 8 inch dia. ( AG-232A)
- SIEVE # 50; mesh 0.300 mm opening, 8 inch dia. ( AG-234A)
- SIEVE # 60; mesh 0.250 mm opening, 8 inch dia. ( AG-235A)
- SIEVE # 70; mesh 0.212 mm opening, 8 inch dia. ( AG-236A)
- SIEVE # 80; mesh 0.180 mm opening, 8 inch dia. ( AG-237A)
- SIEVE # 100; mesh 0.150 mm opening, 8 inch dia. ( AG-238A)
- SIEVE # 120; mesh 0.125 mm opening, 8 inch dia. ( AG-239A)
- SIEVE # 140; mesh 0.106 mm opening, 8 inch dia. ( AG-240A)
- SIEVE # 170; mesh 0.090 mm opening, 8 inch dia. ( AG-241A)
- SIEVE # 200; mesh 0.075 mm opening, 8 inch dia. ( AG-242A)
- PAN & COVER; receiver with lid, 8 inch dia, ( AG-250)
- STANDAR SIEVE ( Stainless Steel Round Sieve 8 inch Diameter)
- Sieve Analysis - Gradation Test ( AG 300A up to AG 350)
- SIEVE SHAKER, Hand Operated ( AG-510)
- SIEVE SHAKER, Electric ( AG-515)
- ROTAP SIEVE SHAKER, Electric ( ME-185)
- WOODEN STANDAR SIEVE ( Stainlles Steel Round Sieve 8 inch Diameter)
- WOODEN SIEVE 1/ 4 Inch up to 4 Inch ( mesh 6.3 mm up to mesh 101.6 mm opening)
- WOODEN SIEVE # 4; Mesh 4.75 mm opening
- WET WASHING SIEVE, # 200, 8 " dia., 4 " depth ( AG-492)
- WET WASHING SIEVE, # 200, 8 " dia., 8 " depth ( AG-493)
- ELONGATION INDEX BS-812 ( AG-170)
- FLAKINESS INDEX BS-812 ( AG-180)
- SAND EQUIVALENT TEST SET, Astm D-2419 ( AG-600)
- SAND EQUIVALENT SHAKER, Astm D-2419/ Aashto T-176 ( AG-610)
- BOTTLE ROLLER BS-812/ Astm C-117 ( AG-621)
- LOS ANGELES ABRASION MACHINE, Astm C-131/ Aashto T-96 ( AG-700)
- AGGREGATE IMPACT TEST, BS-812 ( AG-750)
- AGGREGATE CRUSHING VALUE APPARATUS, BS-812 ( AG-760)
- AGGREGATE CRUSHING VALUE APPARATUS ( AG-760A)
- BULK DENSITY TEST SET, Astm C-29/ Aashto T-19 ( AG-800)
- ABSORPTION OF FINE AGGREGATE TEST SET, Astm C-128/ Aashto T-84 ( AG-810A)
- SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Mechanical Balance, Astm C-127/ Aashto T-85 ( AG-825)
- SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Digital Balance, Astm C-127/ Aashto T-85 ( AG-825)
- ORGANIC IMPURITIES TEST SET, Astm C-40/ Aashto T-21 ( AG-910)
- SOUNDNESS TEST SET, Astm C-88/ Aashto T-104 ( AG-920)

CEMENT EQUIPMENT TEST ( Lab. Uji Bahan/ Beton) :
- AIR PERMEABILITY OF PORLAND CEMENT BY FINENESS DEVICE, Astm C-204/ Aashto T-153 ( CE-100)
- SPECIFIC GRAVITY OF HYDRAULIC CEMENT TEST, Astm C-188/ Aashto T-133 ( CE-110)
- TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE, Astm C-187/ C-191/ T-129/ T-131 ( CE-120)
- COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR, Astm C-109/ Aashto T-106 ( CE-160)
- COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR Electric, Astm C-109/ Aashto T-106 ( CE-160A)
- COMPRESSION MACHINE 100 kN, Compressive Strength Cement Mortar, Astm C-109 ( CE-170)
- COMPRESSION MACHINE 250 kN, Compressive Strength Cement Mortar, Astm C-109 ( CE-175)

CONCRETE EQUIPMENT TEST ( Lab. Uji Beton/ Bahan / Bangunan) :
- CONCRETE CYLINDER MOLD ( Silinder Cetakan Beton) 10 cm dia x 20 cm height ( CO-300)
- CONCRETE CYLINDER MOLD ( Silinder Cetakan Beton) , 15 cm dia x 30 cm height ( CO-301)
- CONCRETE CUBE MOLD ( Kubus Cetakan Beton) , 10 x 10 x 10 cm ( CO-311)
- CONCRETE CUBE MOLD ( Kubus Cetakan Beton) , 15 x 15 x 15 cm ( CO-312)
- CONCRETE BEAM MOLD, 15 x 15 x 60 cm ( CO-317 A)
- CONCRETE BEAM MOLD, 20 x 20 x 80 cm ( CO-319 A)
- COMPRESSION MACHINE 1500 kN ( Mesin Press Beton) , Hydraulic Hand Pump, Astm C-39 ( CO-321.3)
- COMPRESSION MACHINE 2000 kN ( Mesin Test Beton) , Hydraulic Hand Pump, Astm C-39 ( CO-321.4)
- COMPRESSION MACHINE 3000 kN, Hydraulic Hand Pump Astm C-39 ( CO-321.5)
- COMPRESSION MACHINE 1500 kN, Electric Hydraulic Pump Astm C-39 ( CO-325.3)
- COMPRESSION MACHINE 2000 kN, Electric Hydraulic Pump, Astm C-39 ( CO-325.4)
- COMPRESSION MACHINE 3000 kN, Electric Hydraulic Pump Astm C-39 ( CO-325.5)
- UNIVERSAL TESTING MACHINE 1500 kN ( Compression & Tensile) , Electric Hydraulic Pump, Astm C-39 ( CO-320M)
- HYDRAULIC CONCRETE BEAM TESTING MACHINE, Astm C-78 ( CO-330)
- MECHANICAL CONCRETE BEAM TESTING MACHINE, Astm C-78 ( CO-351)
- COMPRESSION MACHINE 2000 kN, Electric Hydraulic Pump, Astm C-39 ( CO-325.4SA)
- COMPRESSION MACHINE 2000 kN, Electric Hydraulic Pump, Astm C-39 ( CO-325.4DA)
- COMPRESSION-TENSION MACHINE 1500 kN, Electric Hydraulic Pump, Astm C-39 ( CO-320M)
- COMPACTING FACTOR APPARATUS, BS-1881 ( CO-355)
- SLUMP TEST SET, Astm C-143/ Aashto T-119 ( CO-370)
- VEBE TIME, BS-1881 ( CO-380)
- AIR CONTENT OF FRESH MIXED CONCRETE, Astm C-231/ Aashto T-152 ( CO-400)
- VIBRATING TABLE ( CO-410)
- VERTICAL CYLINDER CAPPING SET, Astm C-617 ( CO-470)
- MODULUS OF ELASTICITY IN CONCRETE TEST SET ( CO-500)
- SPLIT TENSILE TEST, BS-1881 ( CO-525)
- CONCRETE TEST HAMMER Astm C-805 Proceq/ Original Schmidt ® , Matest, Tecnotest, elcometer.
- CALIBRATION ANVIL, ASTM C-805 ( CO-555)
- CONCRETE TEST HAMMER Type N ( CO-550.1S)
- CONCRETE TEST HAMMER Type L ( CO-550.2S)
- CONCRETE TEST HAMMER Type NR ( CO-550.3S)
- CONCRETE TEST HAMMER Type N Digi-schmidt 2000 ( CO-550.3S)
- DIGITAL CONCRETE TEST HAMMER Type N Digi-schmidt 2000 ( CO-550.5S)
- SILVER SCHMIDT Type Pcn, UN, BN/ Proceq Concrete Test Hammer
- CALIBRATION ANVIL, ASTM C-805 ( CO-555)
- CONCRETE CRACK DETECTION ( CO-325UI) â € œ Ultrasonic Instrumentâ € � Concrete determination for Cavities, crack, defects due to fire and frost
- REBARS LOCATOR ( CO-570S)
- PROFOSCOPE Rebars Detectors, Rebar detection, Measurement of Concrete cover
- PULL-OFF TESTER 6 or 16 kN with digital manometer ( CO-550.8S)
- PULL-OFF TESTER 6 or 16 kN with Electronic Display Device
- BUILDING MOISTURE METERS ( CO-5360BLD)
- ASPHALT/ CONCRETE CUTTER ( CO-400DCC)
- CONCRETE VIBRATOR ( CO-20EY)
- LABORATORY CONCRETE MIXER ( CO-610)

ASPHALT TEST EQUIPMENT ( Lab. Uji Aspal/ Jalan Raya/ Transportasi) :
- SPECIFIC GRAVITY OF SEMI-SOLID BITUMINOUS MATERIALS ( BI-100) , Astm D-70/ Aashto T-228
- DISTILATION OF CUTBACK ASPHALTS ( BI-110) , Astm D-402/ Aashto T-78
- WATER CONTENT IN PETROLEUM PRODUCTS ( BI-120) , Astm D-95/ Aashto T-55
- SAYBOLT VISCOSIMETER ( BI-150A) , Astm D-402/ Aashto T-78
- ASTM THERMOMETER 17 C, 19 to 27 deg.C ( GE-644.1)
- ASTM THERMOMETER 18 C, 34 to 42 deg.C ( GE-644.2)
- ASTM THERMOMETER 19 C, 49 to 57 deg.C ( GE-644.3)
- ASTM THERMOMETER 20 C, 57 to 65 deg.C ( GE-644.4)
- ASTM THERMOMETER 21 C, 79 to 87 deg.C ( GE-644.5)
- ASTM THERMOMETER 22 C, 95 to 103 deg.C ( GE-644.6)
- DIGITAL ASPHALT THERMOMETER ( GE-914TM)
- INFRARED THERMOMETERGE ( GE-380ST)
- FLASH AND FIRE POINT BY CLEVELAND OPEN CUP ( BI-200) , Astm D-92/ Aashto T-48
- FLASH AND FIRE POINT BY CLEVELAND OPEN CUP ( BI-200A) , Astm D-92/ Aashto T-48
- SOFTENING POINT TEST SET ( BI-210) , Astm D-36/ Aashto T-53
- LOSS ON HEATING/ THIN-FILM TEST ( BI-220) , Astm D-6/ D-1754, Aashto T-47/ T-179
- LABORATORY PENETRATION TEST SET ( BI-230) , Astm D-5/ Aashto T-49
- LABORATORY PENETRATION TEST SET ( BI-230 A) ; Astm D-5/ Aashto T-49
- AUTOMATIC BITUMINOUS COMPACTOR ( BI-325AAC) , Astm D-5581, BS 598-107, EN 12697-30
- DUCTILITY OF BITUMINOUS MATERIALS TEST SET ( BI-250) ,
- PARTICLE CHARGE METER ( BI-260)
- CENTRIFUGE EXTRACTOR TEST SET ( BI-300) , Astm D-2172/ Aashto T-164
- CENTRIFUGE EXTRACTOR TEST SET ( BI-300A) , Astm D-2172/ Aashto T-164
- REFLUX EXTRACTOR TEST SET ( BI-310) , Astm D-2172/ Aashto T-164
- BITUMINOUS PENETRATION TEST SET ( BI-230 A) ; Astm D-5/ Aashto T-49
- PORTABLE CORE DRILLING MACHINE ( ZIZ-CF102)
- MARSHALL TEST SET ( BI-320) Astm D-1559/ Aashto T-245
- AUTOMATIC ASPHALT COMPACTOR ( BI-325AAC) Astm D-5581, BS 598-107, EN 12697-30
- PERCENTAGE REFUSAL DENSITY ( BI-325PRD) BS 598-104; EN 12697-32
- CORE DRILLING TEST SET BI-400)
- DIAMOND BIT ( BI-406)
- DIAMOND CORE BIT ( BI-406.4H)
- CORE DRILLING TEST SET ( BI-400L)
- BENKLEMAN BEAM ( BI-450)
- MOT STRAIGHT EDGE ( BI-470)
- ASPHALT RECOVERY APPARATUS ( BI-480)

MISCELLANEOUS :
- UNIVERSAL TESTING MACHINE 1000 kN, 2000 kN ( Compression, Tensile, Bending and Shearing test)
- TENSILE TESTING MACHINE, test of PVC materials ( MI-100)
- DIBBLE ( TUGAL) MI-120
- RAIN GAUGE ( MI-130)
- MORTAR MIXER 5, 10 Kg Capacity

GENERAL EQUIPMENT :
- PROVING RIN G, 100 kg capacity + Kalibrasi ( GE-101.1)
- Proving Ring, 250 lbs capacity + Kalibrasi ( GE-101.2)
- Proving Ring, 500 lbs capacity + Kalibrasi ( GE-101.3)
- Proving Ring, 1.000 lbs capacity + Kalibrasi ( GE-101.4)
- Proving Ring, 2.000 lbs capacity + Kalibrasi ( GE-101.5)
- Proving Ring, 6.000 lbs capacity + Kalibrasi ( GE-101.6)
- Proving Ring, 10.000 lbs capacity + Kalibrasi ( GE-101.7)
- Dial Gauge - Indicator ( Mitutoyo, Teclock) , 0.2 in. x 0.0001 in ( GE-130)
- Dial Gauge - Indicator ( Mitutoyo, Teclock) , 1.0 in. x 0.01 in ( GE-131)
- Dial Gauge - Indicator ( Mitutoyo, Teclock) , 10 mm x 0.01 mm ( GE-135)
- Dial Gauge - Indicator ( Mitutoyo, Teclock) , 20 mm x 0.01 mm ( GE-136)
- Dial Gauge - Indicator ( Mitutoyo, Teclock) , 30 mm x 0.01 mm ( GE-137)
- Dial Gauge - Indicator ( Mitutoyo, Teclock) , 50 mm x 0.01 mm ( GE-138)
- Magnetic Dial Holder ( GE-140)
- Ohaus CENT O-GRAM BALANCE, Timbangan 311 gr cap x 0.01 sensitivity ( GE-150)
- Timbangan Ohaus - TRIPLE BEAM BALANCE ( Ohaus, ADAM) ,
- Timbangan 2610 gr cap x 0.1 sensitivity ( GE-152)
- Ohaus DIAL O- GRAM BALANCE, Timbangan 2610 gr cap x 0.1 sensitivity ( GE-153)
-Ohaus HEAVY DUTY SOLUTION BALANCE, Timbangan 20 kg cap x 1 sensitivity ( GE-157)
- PLATFORM SCALE ( Nagata, AND) , 50 kg cap x 10 gr sensitivity ( GE-159)
- DIGITAL BALANCE ( AND) , 310 gr cap x 0.001 gr sensitivity ( GE-160)
- DIGITAL BALANCE, 6100 gr cap x 0.1 gr sensitivity ( GE-161)
- OVEN ( Memmert) , 14 litre, drying type ( GE-171)
- OVEN ( Memmert) , 32 litre, drying type ( GE-172)
- OVEN ( Memmert) , 39 litre, drying type ( GE-173)
- OVEN ( Memmert) , 53 litre, drying type ( GE-174)
- OVEN ( Memmert) , 108 litre, drying type ( GE-175)
- OVEN ( Memmert) , 256 litre, drying type ( GE-176)
- OVEN ( Memmert) , 416 litre, drying type ( GE-177)
- OVEN ( Memmert) , 749 litre, drying type ( GE-178)
- HOT PLATE, Single burner plate ( GE-191)
- HOT PLATE, Double burner plate ( GE-192)
- GLASS PLATE, 10 mm thick, 30 x 30 cm ( GE-396)
- WATER BATH, COOLING SYSTEM
- BUTANE FIELD HEATER, BUNSEN BURNER, STATIF, TRIPOD STAND,
- GLASS CLAMP, ASBESTOS, WIRE GAUZE
- SQUARE PAN, 25 x 25 x 5 cm; 40 x 40 x 5 cm; 50 x 50 x 7.5 cm; 65 x 65 x 7.5 cm.
- RECTANGULAR PAN, 30 x 20 x 10 cm; 45 x 30 x 15 cm; 60 x 40 x 25 cm.
- THIN BOX, ROUND PAN; SAMPLE CAN
- MIXING BOWL, 10cm - 20cm - 24cm diameter.
- GRADUATED CYLINDER, Glass, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
- GRADUATED CYLINDER, Plastic, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
- VOLUMETRIC FLASK, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
- BEAKER GLASS, 100 ml, 250 ml, 600 ml, 800 ml, 1000 ml capacity.
- ERLENMEYAR FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
- VACUUM FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
- DENSITY BOTTLE, Glass 50 ml - 100 ml capacity.
- SEPARATORY FUNNEL, Glass, 250 ml - 500 ml capacity.
- FILTER FUNNEL, Porcelain, 125 ml - 500 ml capacity.
- DESSICATOR, Non vacuum, silica gel, 21 cm -24 cm - 30 cm diameter.
- DESSICATOR, Vacuum type, silica gel, 21 cm -24 cm - 30 cm
diameter.
- FUNNEL, plastic or glass, wide or narrow mouth.
- BURRETE, , 10 ml, 25 ml, 50 ml, 100 ml capacity.
- EVAPORATING DISH, 9 cm dia - 100 ml capacity; 12 cm dia - 250 ml capacity; 15 cm dia â € “ 350 ml capacity; 17 cm dia., 500 ml capacity.
- MORTAR & PASTLE, 12 cm - 15 cm- 18 cm diameter.
- WASH BOTTLE, 250 ml - 500 ml - 1000 ml capacity.
- PIPETTE, 5 ml - 10 ml capacity
- CRUCIBLE, 13 ml - 18 ml - 25 ml - 40 ml capacity.
- THERMOMETER, range 0-50 deg.C; 0-100 deg.C; 0-150 deg.C; 0-200 deg.C; 0-300 deg.C.
- POCKET DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
- DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
- ASTM THERMOMETER 12 C, 20 to 102 deg.C / Specific Gravity ( GE-641)
- ASTM THERMOMETER 63 C, 8 to 32 deg.C ( GE-642)
- ASTM THERMOMETER 13 C, 155 to 170 deg.C / Loss on Heating ( GE-643)
- ASTM THERMOMETER 15 C, 15 C, 2 to 80 deg.C / Softening Point ( GE-646.1)
- ASTM THERMOMETER 16 C, 30 to 200 deg.C / Softening Point ( GE-646.2)
- ASTM THERMOMETER 11 C, 6 to 400 deg.C / Open Flash ( GE-648)
- ASTM THERMOMETER 7 C, 2 to 300 deg.C / Distilation ( GE-649.1)
- ASTM THERMOMETER 8 C, 2 to 400 deg.C / Distilation ( GE-649.2)
- MANOMETER, 25 kg/ cm2 capacity, 6 " diameter ( GE-670)
- MANOMETER, 60 kg/ cm2 capacity, 6 " diameter ( GE-671)
- MANOMETER, 150 kg/ cm2 capacity, 6 " diameter ( GE-672)
- MANOMETER, 250 kg/ cm2 capacity, 6 " diameter ( GE-673)
- MANOMETER, 300 kg/ cm2 capacity, 6 " diameter ( GE-674)
- MANOMETER, 500 kg/ cm2 capacity, 6 " diameter ( GE-675)
- MANOMETER, 700 kg/ cm2 capacity, 6 " diameter ( GE-676)
- MANOMETER, 1000 kg/ cm2 capacity, 6 " diameter ( GE-677)
- VACUUM MANOMETER, 4 " dia. 0-76 cm HG ( GE-679)
- VACUUM PUMP, Rotary type, 1/ 2 HP GE-680)
- HYDRAULIC CYLINDER, 30 - 50 - 100 - 150 - 200 - Ton capacity.
- HYDRAULIC HAND PUMP, 10.000 psi, single acting ( GE-690)
- HYDRAULIC HAND PUMP, 10.000 psi, double acting ( GE-691)
- HYDRAULIC ELECTRIC PUMP, 10.000 psi, single acting ( GE-694)
- HYDRAULIC ELECTRIC PUMP, 10.000 psi, double acting ( GE-695)
- HYDRAULIC HOSE, 100 - 200 cm length, 10.000 psi ( GE-697)
- STOP WATCH, 60 sec sweep x 30 min ( GE-700)
- STOP WATCH, 30 sec sweep x 30 min ( GE-701)
- VERNIER CALIPER, 6 inch ( 150 mm) range measuring ( GE-710)
- VERNIER CALIPER, 8 inch ( 200 mm) range measuring ( GE-711)
- VERNIER CALIPER, 10 inch ( 250 mm) range measuring ( GE-712)
- VERNIER CALIPER, 12 inch ( 300 mm) range measuring ( GE-713)
- Levels, Open End Wrench, Ring Spanner, Allen Key, Pipe Wrench, Strap Wrench, Adjustable
- Wrench, Rubber Gloves, Leather Gloves, Asbestos Gloves, Quatering Canvas.
- Round Scoop, Flat Scoop, Scoop Pan, Aggregate Scoop. Round Scoop, Flat Scoop, Scoop Pan,
- Aggregate Scoop.Spatula, Scraper, Wire Saw, Spoon, Trowel, Gardener' s Type Trowel, Chissel,
- Ruler, Rubber Mallet, Steel Wire Brush, Brass Wire Brush, Soft Brush, Tamping Rod, Straight Edge. MORTAR MIXER, Bench model; 5 litre capacity.

MINING & COAL EQUIPMENT ( Mesin Preparation & Pengujian Batubara/ Laboratorium Batubara/ Lab. Nikel)
- JAW CRUSHER 5 " x 8 " ( ME-100)
- JAW CRUSHER 2 3/ 8 " x 8 " ( ME-130)
- JAW CRUSHER 6.5 " x 8 " ( ME-110)
- LAB TYPE JAW CRUSHER ( ME-140)
- SINGLE ROLL CRUSHER 10 " ( ME-150)
- DOUBLE ROOL CRUSHER 10 " x 6 " ( ME-160)
- DOUBLE ROOL CRUSHER 20 " ( ME-165)
- ROTARY SAMPLE DEVIDER 15 KG ( ME-170S1)
- ROTARY SAMPLE DEVIDER 30 KG ( ME-170S2)
- ROTARY SAMPLE DEVIDER 50 KG ( ME-170S3)
- ROTARY SAMPLE DEVIDER 120 KG ( ME-170S4)
- RO-TAP SIEVE SHAKER 8 " ( ME-180)
- RO-TAP SIEVE SHAKER 12 " ( ME-185)
- SHAKING TABLE / Table Consentrator / Meja Goyang ( ME-190)
- SAMPLE SPLITTER, Variable chute ( alumunium) width 1/ 2 inch ( 1/ 2â € � , 1â € � , 1 Â ½ â € � , 2â € � , etc)
- SAMPLE SPLITTER, Stainlles steel, chute width 1/ 4 inch, 32 holes, with scoop & pan
- SAMPLE SPLITTER, Stainlles steel, chute width 1/ 2 inch, 12 holes, with scoop & pan
- SAMPLE SPLITTER, Stainlles steel, chute width 3/ 4 inch, 12 holes, with scoop & pan
- SAMPLE SPLITTER, Stainlles steel, chute width 1 " inch, 12 holes, with scoop & pan
- DISC PULVERIZER ( ME-210)
- SUPER CRUNCH ( ME-220)
- BALL MILL ( ME-230BM)
- HAMMER MILL ( ME-240)
- GRINDING MILL ( ME-245)
- RAYMOND MILL ( ME-250)
- HARD GROVE GRINDABILITY ( ME-280)
- BIG DRYING SHED 180 x 120 x 550 cm ( ME-290)
- HOT PLATE ( ME-330)
- DRYING OVEN 120 X 110 X 220 cm ( ME-350)
- CUTTING MESIN ( ME-400)
- LAB. PULVERIZER Pneumatic ( ME-200P)
- LAB. PULVERIZER Manual ( ME-200A)
- GRINDING MILL ( ME-245)
- DISC MILL ( ME-210)
- V-MIXER ( ME-175)
- FLOW TEST ( ME-160AM)
- GRINDING HEAD SET C-500
- GRINDING HEAD SET C-1000
- GRINDING HEAD SET C-2000
- BIG DRYING SHED
- DUST COLLECTOR
- HOT PLATE
- OVEN ROTARY
Part & Accessories :
- JAW FACE 5 " X 8 "
- JAW FACE 5 " X 8 " ( Manganese)
- JAW FACE TYPE LAB

Kami senantiasa berupaya memberikan solusi terhadap pengendalian mutu pekerjaan anda di bidang â € œ Konstruksi Bangunan/ Gedung/ Jalan, Riset/ Penelitian/ Laboratorium & Pendidikan, Sipil Engineering sehingga menjadi â € œ Bernilai & Bermutu Tinggiâ € � dengan memilih dan menggunakan produk dengan STANDAR KUALITAS & JAMINAN MUTU PABRIKAN.

PT. MBT Utama ( Mektan Babakan Tujuh Utama) sejak Tahun 1974 dikenal sebagai â € œ Pioneerâ € � di bidang Peralatan Uji Laboratorium khususnya Laboratorium Teknik Sipil â € œ Berpengalaman dan Ahli di bidang Civil Laboratory Testing Equipmentâ € � .

HUBUNGI LINE PERUSAHAAN KAMI :
- Untuk Informasi dan Pemesanan : 085.2221.77772
- Katalok, informasi kerjasama dan dukungan pengadaan : mbt.divpemasaran@ yahoo.co.id

Dengan senang hati kami akan melayani dan memberikan Informasi yang anda butuhkan.

Anda bisa mengklik " Info Perusahaan " , " Katalog Produk " , " Penawaran Dagang " dan " Hubungi Kami " untuk melihat isi dan informasi lain dari situs PT. MBT UTAMA ( Distributor & Agen alat Lab. Teknik Sipil) 085222177772, E-mail : mbt.divpemasaran@ yahoo.co.id Katalok, informasi kerjasama dan dukungan pengadaan

Anda bisa mengklik "Info Perusahaan" dan "Hubungi Kami" untuk melihat isi dan informasi lain dari situs PT. MBT UTAMA ALAT LAB ( 085222177772 / 022-61156261).