Keterangan :

Specifications
Oscilloscope Bandwidth
Fluke 125: 40 MHz
Fluke 124: 40 MHz
Fluke 123: 20 MHz
Dual input True RMS Meter
Vdc, Vac, Vac+ Vdc, Ohms, Continuity , Diode-test
Current, ° C, ° F, Capacitance, dBV, dBM, Crest Factor, Touch Hold and Zeroset
TrendPlot Recording
Automatic vertical scaling and time compression.
Display the actual, MIN, MAX and AVG reading.
Cursors
Fluke 125/ 124:  T, 1/  T, V,  V, rise- and fall time
Real-time sample rate
25 MS/ s
Equivalent sampling rate
up to 2.5 GS/ s ( 125, 124) or 1.25 GS/ s ( 123) .
Inputs and digitizers
2
Timebase range
Fluke 125/ 124: 20 ns - 1 min/ div
Fluke 123: 10 ns - 1 min/ div
Input sensitivity
5 mV - 500 V/ div
Trigger types
Connect-and-Viewâ„¢ , Free Run, Single Shot, Edge, Video, External
Glitch capture
40 ns
Scope measurements
Automatic measurements: 26 ( all instruments) On top, Fluke 125 has additional measurement functions for Power ( W) , VA, VAR and Power Factor ( PF) for single phase and balanced-three-phase ( delta) power systems.
Harmonics mode
Fluke 125 has capbility to analyze the harmonics contents of power signals. See below for details.
Maximum record length
512 min/ max pts per input
Memory
Fluke 125/ 124: 20 screens and setups
Fluke 123: 10 screens and setups

Additional Power measurement capabilities ( Fluke 125 only)
Measurement types:
• Watt,
• VA,
• VAR,
• Power Factor ( PF)
Power configuration:
Single phase or balanced three-phase ( delta-configuration) mains supply
Voltage measurement
Channel A; using STL120, voltage probe or direct input
Current measurement
Channel B, using i400s ( included) or other compatible current clamp
Current Clamp or Shunt sensitivity:
0.1 / 1 / 10 / 100 / 1000 mV/ A, 10 mV/ mA and 400 mV/ A.

Harmonics Mode ( Fluke 125 only)

Converts waveform information into a harmonics display ( using FFT processing) which shows the relative amplitudes of the 1st up to the 33rd harmonic
Analyzed waveform:
Voltage waveform( Ch.A) , Current wavefrom ( Ch.B) or Power ( Ch.A x Ch.B) , automatically generated.
Harmonics Frequency range:
DC up to 33rd harmonic ( for fundamental up to 60 Hz) ;
DC up to 24th harmonic ( for fundamental up to 400 Hz) .
Display
Bargraph showing 1st up to 33rd harmonic and DC; amplitude displayed in % relative to fundamental
Measurements:
Relative amplitude of individual harmonics;
THD in % r or % f.

Environmental Specifications
Operating Temperature
0 º C to 50 º C
Storage Temperature
-20 ° C to + 60 ° C
Operating Altitude
3, 000 m

Safety Specifications
Electrical Safety
600V CAT III ( EN61010-1)

Mechanical & General Specifications
Size
232 x 115 x 50 mm
Weight
1.2 kg
Warranty
3-years on main instrument, 1-year on accessories
Battery Life
7 hrs using NiMH
RS232/ USB Interface
Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC