Selamat Datang di Indotrade.com
Masuk | Daftar
Selamat Datang di
PT. Watermart Perkasa

Anggota Prioritas Prioritas Indotrade
Tahun ke-15
PT. Watermart Perkasa
PT. Watermart Perkasa
Indonesia
  • Katalog Produk

    Membrane Filmtec Extra Low Energy 700 GPD-XLE-2540

    Membrane Filmtec Extra Low Energy 700 GPD-XLE-2540

    Jumlah Pesanan:
    Cara Pembayaran:
    Transfer Bank (T/T), Tunai

    Keterangan :

    A complete range of FILMTECâ„¢ 2540-size elements is available to meet a wide variety of customer needs for commercial applications, from the highest purity water to the lowest total system costs.

    * FILMTEC XLE-2540 is the most productive, lowest pressure RO membrane available, delivering the lowest total system cost.
    * May be cleaned over the widest pH range ( pH 1-13) for the most effective cleaning.
    * The Dow Filmtec XLE-2540 reverse osmosis elements offer better system performance and economics by operating at very low applied pressure.
    * The Filmtec XLE-2540 membrane is made with a patented technology and provides consistent and reliable system performance.
    * The new XLE series of elements replaces the Dow Filmtec TW30LE elements which were made with an older membrane technology.
    * Tape-wrapped elements are built with the same high quality membranes and materials of construction as industrial elements, without the hard outershell. This makes them more economical for commercial systems with one or two elements per housing.
    * The Filmtec XLE-2540 is the most productive, lowest pressure RO membrane element.
    * Dimensions: 2.4" W X 40" L

    Tape-wrapped elements are built with the same high quality membranes and materials of construction as industrial elements, without the hard outershell. This makes them more economical for commercial systems with one or two elements per housing.
    Product Name Nominal Active Surface Area
    ft2 ( m2) Permeate Flow Rate
    gpd ( m3/ d) Stabilized Salt Rejection
    ( % )
    FILMTEC XLE-2540 28 ( 2.6) 850 ( 3.2) 99.0
    1. Permeate flow rate and salt rejection based on the following test conditions: 500 ppm NaCl, 100 psig ( 6.9 bar) , 77° F ( 25° C) , and 15% recovery.
    2. Permeate flow rates for individual elements may vary + / -20% .
    3. For the purpose of improvement, specifications may be updated periodically.

    For more information, visit : http: / / www.watermart.co.id



Anda mendapat [3] permintaan baru.
Ke Menu Anggota

Depan - Penawaran Dagang - Daftar Produk - Daftar Permintaan - Daftar Kerjasama - Daftar Perusahaan
© 2024 Indotrade.com. Hak Cipta Dilindungi Undang-undang.