Katalog Produk

Keterangan

RC1201 2E1 FE BL
Feature
Functionality Transmits TDM-based services over Ethernet, IP or MPLS packet-switched networks
Operation mode • Unframed E1 over UDP over IP over Ethernet
• Fractional E1 over UDP over IP over Ethernet
• Fractional E1 with CAS over UDP over IP over Eth
TDM User port 2*E1
2*E1 or 1*serial port
Serial port V.35, RS-530/RS-422,V.24/RS-232, V.36/RS 449 and X.21
Fast Ethernet port Three Fast Ethernet ports including one fiber port (SFP-based) and two
copper ports can be configured as one uplink and two downlinks flexibly
E1 mode Framed and unframed E1 mode
Loopback test External loopback test is available to test the connection between the E1
port and the PBX; Internal loopback test is available to test the connection
between the E1 port and the IP network
BER Test Internal and External BER test can be activated on E1 port for flexible link
diagnostics
Virtual channel
channel test
Virtual Cable Test (VCT) can be set to diagnose the attached cable plant
Ethernet payload TDMoIP, CESoPSN, SAToP and HDLCoPSN
VLAN VLAN tagging, stacking and filtering
Rate limiting Ingress and egress limiting on both user port and network port
QoS IEEE802.1p&Q, ToS/Diffserv and EXP bits for priority marking of the TDM
over IP traffic in Ethernet, IP and MPLS networks
Queuing Four priority queues based on IP Precedence, 802.1P and DSCP
Signaling Transparent to all signaling protocols
Clock mode Selectable internal clock, E1/T1 recovered clock, PSN adaptive clock and
external clock
Jitter Configurable jitter buffers compensates for delay variation introduction by
the Ethernet network
Statistics E1, Ethernet and jitter buffer statistics
Compliance Support MPLS, MEF8 and UDP/IP protocols
Management Local terminal, remote Telnet, web-based management and SNMP