Keterangan :

The Ruth Lee Flame Retardant dummies are specially designed with high temperature rescue scenarios in mind. The dummies are especially suited for ‘ snatch’ rescue scenarios with real flames and the chance of ‘ flash-over’ . Even though flame retardant dummies demonstrate a good balance between temperature and abrasion resistance, they are not as robust as the general purpose range and should not be used for general training. The assemblage of the flame retardant dummies is similar to the General Purpose dummy. However, the flame retardant dummy uses a high tech H/ D Nomex material for the outer carcass, the material being stitched using PTFE coated glass thread.

The protective overalls are also made using Nomex which is a polyamid-imide material that offers maximal protection against very high temperatures. It is permanently non-flammable and most commonly used in protective clothing against heat and flames.

Flame Retardant training dummies are fitted with genuine heat resistant fire-fighters safety boots. The boots are especially good in protecting the legs of the dummy when dragged along the ground and it will also help greatly in extending the life of the dummy.

A separate hood, also made with Nomex material completely covers the head, being separate makes the fitting of replacement overalls considerably easier.

The overalls will easily withstand temperatures of 200-250 degs, the average temperature at knee height for ' hot fire' training and approximately 1 metre from heat source. The dummies will only starts to ' fail' at temperatures exceeding 400 degs and the fire boots will start to fail first. Flash-over temps greater than 1000 degs are withstood by the dummy for short periods. However if the dummy are placed too close to naked flames for a considerably period of time, they will fail ( as any turnout gear would) . If the scenario for training are for use with flammable gel for fire blanket and extinguisher training, there are another fire rescue model available which are more suitable.

All dummies are weighted to produce an anatomically correct weight distribution and the ' feel' of an unconscious patient and are available in 2 weights - 30kg and 50kg.

Please note - the high density polypropylene webbing seen on our other dummies cannot be used on this dummy as it will melt at the temperatures this dummy will endure.

For more info, email us at info@ tecsen.com.my