Features :
1. This chiller with special temperature control design could be applied to semi-conductor industry and use the PID thermostat to maintain temperature precise ± 0.1 o C.
2. Uses high-pressure pump and water pressure circuit ensure system protection.
3. Assembling DI water filter which could make the purity of DI water maintain below to 10M
4. Uses SUS 316 stainless steel compact brazed heat exchanger to prevent clogging circuit that leaded by rusty and verdigris and reduce the resistance, saves on energy consumption and ensure good heat exchange.

CS SERIES - Water Cooler for Optoelectronics & Medical Equipment
Model CS-1 CS-4 CS-12 CS-24 CS-36 CS-60 CS-90 CS-120
Cooling capacity BTU/H 1000 4000 12000 24000 36000 60000 90000 120000
Colling capacity KCAL/HR 250 1000 3000 6000 9000 15000 22500 30000
Power source V 1 220V 3 AC220V 50/60HZ

Total overburdening Current A 3 4 6 9.6 11.2 22.5 36.5 51.2
Water pump horsepower HP 1/3 1/3 1 1 1.7 1.8 3 4
Water pump Discharge rate I / min 20 20 30 30 50 60 60 90
Water tank liter 10 10 20 40 60 80 180 180
Inlet and outlet pipe-diameter inch 1/2"x1/2" 1/2"x1/2" 3/4"x3/4" 1"x1" 1"x1" 1"x1" 11/4"x11/4" 11/4"x11/4"
CSA Dimension(DxWxH) mm 440.5x363x526.5 360x440x887 500x460x947 490x690x1175 600x920x1245 700x1100x1345 1300x800x1890 1300x800x1890
CSW Dimension(DxWxH) mm 440.5x363x526.5 360x440x887 500x460x947 490x690x1175 600x920x1245 600x920x1245 700x1100x1345 1300x800x1890
Cooling medium gas 22 134A 22 22 22 22 22 22
CSA Weight kg 43 43 95 140 197 310 350 440
CSW Weight kg 41 41 93 132 172 298 310 410