* Aluminum single point load cell

Specifications
Rated capacity 4.903 N{ 0.5 kgf} ~ 49.03 N{ 5 kgf}
Safe overload 450 % R.C.
Ultimate overload 600 % R.C.
Rated output 0.5 mV/ V± 0.05 mV/ V
( FSU-0.5K : 0.5 mV/ V± 0.075 mV/ V)
Non-linearity 0.1 % R.O.
Hysteresis 0.1 % R.O.
Repeatability 0.1 % R.O.
Creep 0.15 % R.O./ 20 min
Creep recovery 0.15 % R.O./ 20 min
Excitation, recommended 5 V or less
Excitation, maximum 8 V
Zero balance ± 0.4 mV/ V
Input resistance 340 © ± 50 ©
Output resistance 340 © ± 50 ©
Insulation resistance 1 000 M© or more ( DC50 V) ( between bridge and main body)
Temp. range, compensated 0  ~ 60 
Temp. range, safe -10  ~ 80 
Temp. effect on zero 1 % R.O./ 10 
Temp. effect on output 1 % LOAD/ 10 
Lead wire AWG30, 150 mm directly attached, cable end is separated
Class of protection IP00
Material of element Alluminium alloy
Durability 1 000 000 times with rated load applied.
Effect of eccentric load - The center of loading plate and also the center of load cell should be the same position.
- Error is within 0.8 % R.O. applied with 1/ 2 of rated capacity at the position of 50 mm of eccentricity.