We supply hobart aws DESCRIPTION: HOBALLOY 10018D2 is an high quality electrode for high tensile steels and manganese molybdenum steels. The coating is specially formulated to resist moisture pick-up under conditions of high heat and humidity. The electro

Harga:

nego

Jumlah Pesanan:

Negara Asal:

Amerika Serikat

Cara Pembayaran:

Transfer Bank (T/T)

Jumlah:

limited

Kemas & Pengiriman:

box

We supply hobart aws DESCRIPTION: HOBALLOY 10018D2 is an high quality electrode for high tensile steels and manganese molybdenum steels. The coating is specially formulated to resist moisture pick-up under conditions of high heat and humidity. The electrode offers resistance to moisture reabsorption which helps prevent hydrogen cracking and aids in elimination of starting porosity. Definitely a preferred electrode with high operator appeal. APPLICATIONS: HOBALLOY 10018D2 is designed for applications requiring at least 100, 000 psi tensile strength, good ductility and crack resistance. Typical applications include manganese-moly castings, alloy forgings, structures and pressure vessel applications in either the as welded or stress relieved conditions. FEATURES: BENEFITS: • Good arc characteristics • Stable, easy to control arc • Good ductility • High impact resistance • Low spatter level • Improves weld bead appearance, higher deposition • Quick and easy slag removal • Reduces clean-up time • Low moisture reabsorption • Prevents starting porosity • Low smoke level • Welder safety and comfort • Low hydrogen, less than 4 ml/ 100 g • Resistant to hydrogen-induced cracking TYPICAL WELD METAL PROPERTIES* ( Chem Pad) : TYPICAL MECHANICAL PROPERTIES* ( SR) : TYPICAL CHARPY V-NOTCH IMPACT VALUES* ( SR) : DIFFUSIBLE HYDROGEN: 2.2 ml/ 100 gr CONFORMANCES AND APPROVALS: • AWS A5.5, E10018-D2 H4R, ASME SFA 5.5, E10018-D2 H4R * The information contained or otherwise referenced herein is presented only as “ typical� without guarantee or warranty, and Hobart Brothers Company expressly disclaims any liability incurred from any reliance thereon. Typical data are those obtained when welded and tested in accordance with AWS A5.5 specification. Other tests and procedures may produce different results. No data is to be construed as a recommendation for any welding condition or technique not controlled by Hobart Brothers Company. Hobart Brothers Company • 400 Trade Square East • Troy, OH 45373 PH: ( 800) 424-1543 • FX: 800-541-6607 • www.hobartbrothers.com Replaces 070703 613-K, INDEX: 090605 HOBALLOY® 10018D2 AWS 10018-D2 H4R Weld Metal Analysis AWS Spec Carbon ( C) 0.06 0.15 max Manganese ( Mn) 1.96 1.69 - 2.00 Phosphorus ( P) 0.01 0.03 max Sulphur ( S) 0.01 0.03 max Silicon ( Si) 0.25 0.80 max Nickel ( Ni) 0.08 0.90 max Molybedenum ( Mo) 0.35 0.25 - 0.45 Stress relieved 1 hour at 1150° F AWS Spec Tensile Strength 116, 000 psi ( 797 MPa) 100, 000 psi Yield Strength 100, 000 psi ( 693 MPa) 87, 000 psi Elongation % in 2� 22% 16% Stress relieved 1 hour at 1150° F AWS Spec Avg. at -60° F 32 ft• lbs ( 43 J) 20 ft• lbs RECOMMENDED WELDING PROCEDURES: GENERAL: Electrode positive, work negative ( DCEP) or AC ARC LENGTH: Very short arc FLAT: Angle electrode 10-15° from 90° VERTICAL-UP: Use weaving techniques VERTICAL-DOWN: Not recommended OVERHEAD: Use slight weaving motion within the puddle STORAGE: After opening, store in holding oven ( 250° F to 400° F) until used. RECONDITIONING: If exposed to atmosphere for extended periods, reconditioned for one ( 1) hour at 600° F. RECOMMENDED OPERATING PARAMETERS: * For out of position welding, reduce amperages shown by 15% . TYPICAL DEPOSITION RATES ( at Optimum) : AVAILABLE DIAMETERS AND PACKAGES: Material Safety Data Sheets on any Hobart Brothers Company product may be obtained from Hobart Customer Service. Because Hobart Brothers Company is constantly improving products, Hobart reserves the right to change design and/ or specifications without notice.

Diameter
Inches mm
Type of Power
Minimum
Amps
Optimum*
Amps
Maximum
Amps
3/ 32 2.4
1/ 8 3.2
5/ 32 4.0
3/ 16 4.8
1/ 4 6.4
DCEP or AC
DCEP or AC
DCEP or AC
DCEP or AC
DCEP or AC
70
90
130
200
300
100
135
170
250
350
110
160
220
300
400

Diameter
Inche s mm
Type of Power
Amperage
Deposition Rate
Lbs/ Hr.
3/ 32 2.4
1/ 8 3.2
5/ 32 4.0
3/ 16 4.8
1/ 4 6.4
DCEP
DCEP
DCEP
DCEP
DCEP
100
135
170
250
300
2.35
2.80
4.00
5.55
7.80

D iameter
Inches mm
Length
Inches mm
50# Cans
3/ 32 2.4
1/ 8 3.2
5/ 32 4.0
3/ 16 4.8
1/ 4 6.4
14� 355
14� 355
14� 355
14� 355
18� 455
S125732-035
S125744-035
S125751-035
S125758-035
S125781-035

HOBALLOY is a registered trademark of Hobart Brothers Company, Troy, Ohio.

Please Contact :
saleskehan@ gmail.com
fax 62 21 5602582
92935340
081807489548

Kenalkan ke teman Anda