Explosion proof door holding electromagnet Dictator Technik

Harga:

Bersaing dan berkualitas

Jumlah Pesanan:

Negara Asal:

Amerika Serikat

Kemas & Pengiriman:

Sesuai pesanan

DICTATOR provides complete hold open systems for hazardous areas

They comprise explosion-proof smoke and heat detectors, door operators and the electromagnets. They comply with the requirements for group II products and can be installed in all zone 1 and 2 areas (according to VDE 0165). The explosion proof magnets are encapsulated (EEX m). Two series are available: with ex-proof connection box or with connection cable. The standard length of the cable is 2 m, but it can be delivered in the length required on site. The holding force of the magnets is either 550 N or 145N. The integrated release pin eliminates any remanence after switching off the power supply of the magnets, ensuring that the magnets always releases the door. All ex-proof magnets are equipped with diodes and polarity protection.

The DICTATOR ex-proof magnets have been tested both according to EN 1155:2005 for hold-open systems and the ATEX directive by the Physikalisch-Technische Bundesanstalt Braunschweig (certificates PTB 03 ATEX 2174 X and PTB 03 ATEX N060).

In addition to the ex-proof magnets DICTATOR also provides a large range of electromagnets for hold-open systems, that comply with the EN 1155:2005 and are approved for the use in hold-open systems.

Kenalkan ke teman Anda