Keterangan :

Exterior Coatings -Primeseal

Efflorescence Resistant Penetrating Primer
2.0 N/mm2
Efflorescence Resistance : No Efflorescence of Paint Film
Weathering Resistance : Excellent

PACKING 20 litres pail

Area Of Application:

Can be used for priming plastered walls, asbestos, brick, false ceiling, concrete, etc.
top
Method of Application

Surface Preparation

Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease etc
Mechanical means such as wire brushing & shot blasting can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required
All surface cracks up to 5 mm width should be filled up with DR. FIXIT CRACK-X PASTE/ POWDER. Cracks more than 5 mm and all separation gaps should be filled up with DR. FIXIT PIDICRETE URP modified mortar or as specified.
Application Procedure

Dilute DR. FIXIT PRIMESEAL with water in proportion of 2:1 and stir well until a uniform consistency is achieved
Apply a single coat of diluted DR. FIXIT PRIMESEAL on the cleaned substrate & allow it to dry for 2 to 3 hours before commencing to further finish coats
Light cut with sand paper the coating of DR. FIXIT PRIMESEAL before commencing the finish coats on internal walls
top
Precautions & Limitations

50% dilution is recommended for Dr. Fixit PRIMESEAL by water.
Excess water on substrate must be removed by suitable means.
Do not apply during rains or in direct sunlight.
Do not tint the primer..