Dry Film Thickness Elcometer 456
adalah alat untuk mengukur ketebalan cat kering diatas permukaan Ferrous atau Non Ferrous

The new Elcometer 456 Coating Thickness Gauge sets new standards making measuring dry film thickness faster, reliable and accurate; helping you to become more efficient.

The....

spare parts GRACO.
menjual berbagai jenis spare parts airless pump painting merk GRACO. seperti Airless Gun, Silverplus Gun, Switch Tip ( berbagai ukuran ) , Tip Guard, Airless....

If the chloride levels in the wash water are too high, this will promote premature corrosion, shortening the life of both steel and concrete structures.

Used to monitor....

Chloride salts left on the surface before the first coat is applied can result in the coating system being forced off the surface by corrosion or blistering before the full life....

Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely.

Contamination can build up, particularly if the blast media....

Designed to accurately, measure surface chloride, sulphate and nitrate ions in minutes, the Elcometer 134 CSN Salt kit offers a single kit solution for testing in the field.

....

Soluble salts on a surface are absorbed into a special filter paper soaked with distilled water. The Elcometer 130 measures the conductivity of the wet paper, calculates the salt....

Featuring a unique automatic test mode, the Elcometer 2250 Krebs Viscometer measures the viscosity of paints, varnishes, adhesives, pastes and liquid inks at the touch of a button....

The Elcometer 2300 range of rotational viscometers measures the viscosity of liquids in accordance with several standards.

Using a rotational viscometer, the properties of....

The Elcometer 280 is a â € ˜ stick typeâ € ™ holiday detector which has been designed to make pulsed DC high voltage holiday detection safer, easier and more reliable than ever before....

The Elcometer 214 is a simple, easy-to-use, non-contact thermometer which safely and accurately measures surface temperature of non-reflective materials using infrared technology.....

Rugged & repeatable hand held gauges designed to non destructively measure the thickness of metal substrates whilst ignoring the thickness of up to 2mm ( 80mils) of an applied....

A range of 3 robust, hand held gauges allows you to make reliable measurements or scan a length of material for defects or the thinnest point using the scan mode.

Each gauge....

The Elcometer 141 PIG is a quick, versatile method of examination and destructive measurement of coatings in a portable, easy to use instrument.

Ergonomically designed to give....

Elcometer 135B Bresle Patches are used to determine surface chloride contamination and are self-adhesive rubber film patches with a sealed compartment for sampling soluble....

Incorporating a flat sensor, the Elcometer 138 Conductivity Meter can measure the conductivity of a solution from a single drop of a sample.

Users can either place a sample on....

It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is....

The Elcometer 407 Statistical Glossmeter measures gloss at three angles of reflection; 20Â ° , 60Â ° and 85Â ° and uses the internal memory to store readings.

Gloss is measured by....

Gloss is measured by directing a constant intensity light beam at an angle to the test surface and monitoring the reflected light at the same angle. Different gloss levels require....