Katalog Produk

Keterangan

Type BTA.

* The BTA rotorseal was designed for simultaneous transfer of as many as three different fluids

* Three 1/ 2- 14 American National Pipe thread inlet ports on the side of the stationary body provide access to the concentric fluid passages.

* All three passages can discharge directly into the rotating shaft.

* A 1/ 2- 14 port in the mounting flange can be used as an optional outlet for the outer most passage.

Type RT

* The RT rotorseal has two 1" and one 0.5" diameter passageways and is available in a standard cast iron shaft design or a corrosion- resistant model with a brass shaft.

* The rotating seal is provided by a non- metallic sealing ring, held against the rotorseal shaft by a light spring force.

* The design promotes positive protection against leakage and minimal seal wear.

* Ball bearings are used between the stationary and rotating ports to provide rigidity to the rotorseal assembly and to minimize the running torque.

FOR IINFO PLEASE CONTACT :

Anto

0812 84 888 411

marketing manager

Anto

e- mail : antodutapertiwi@ yahoo.co.id

http: / / marweld.blogspot.com. .