Jual EPAM-5000, Hub. Bp. Sinaga, email: pro.teknik@ yahoo.co.id; pro-teknik@ live.com, Tlpn/ fax: 021 470 4719, Mobile : 0815 1311 6206 ; 021 93 800 487 ; 08 2124 167 067
Keterangan
EPAM-5000,
Electronic Monitor for Measuring EPA PM Criteria
The HAZ-DUST EPAM-5000 is a portable microprocessor-based particulate monitor suitable for
ambient, environmental, and indoor air quality investigations. Highly sensitive, this
monitor uses light scattering to measure particle concentration and provide immediate
real-time determinations and data recordings of airborne particle concentration in
milligrams per cubic meter ( mg/ m3) . Interchangeable size-selective sampling heads allow
PM10, PM2.5, PM1.0, or TSP monitoring. The unique aerodynamic particle sizing and optional
47-mm in-line filter holder loaded with an appropriate filter can provide concurrent
gravimetric sampling. Sampling data can be downloaded to and stored on a PC for analysis and
report generation using DustComm Pro Software ( included) .
Fast, easy setup
Highly sensitive and accurate
0.001 to 20.0 mg/ m3 for particles 0.1 to 100 µ m
Optional 0.01 to 200 mg/ m3 range available
Accuracy is ± 10% to NIOSH Method 0500 using SAE fine test dust
Internal air sample pump for 4.0 L/ min flows ( pump has a variable flow rate designed for use
at 4.0 L/ min to achieve proper size selection.)
Internal temperature compensation for ambient use
Unique aerodynamic particle-sizing real-time sensor
Use optional EPA FRM-style filter holder for gravimetric reference
High correlation to EPA PM10 methods and TEOM®
Up to 24-hour operation on one battery charge
Continuous monitoring with AC adapter
Immediate display and data storage
Rugged water-tight carry case
Audible alarm siren
Store up to 15 months of data
RS232 digital output
Easy-to-use DustComm Pro data analysis and reporting software included
Large, easy-to-read display
Portable and compact
6 x 14 x 10 inches ( 15.2 x 35.6 x 25.4 cm)
12 pounds ( 5.4 kg)
Interchangeable size-selective sampling heads for EPA parameters
PM10, PM2.5, PM1.0, and TSP
Real-time clock and data display
RFI/ EMI shielded; CE marked
EPAM 5000 Features
User-programmable start and stop time for unattended data collection
On-screen user-selectable sampling parameters retained in memory for quick, easy deployment
when sampling parameters remain unchanged
Wireless data transmission option transmits data up to 10 miles
Improved DustComm Pro PC Software provides:
Greater flexibility in graphical reports — create and label in new " draw and paint" program
Basic trend analysis
Live data feed and logging from wireless data transmission
Interfaces with the VDM-7500 wireless video exposure dust monitoring system
EPAM-5000 Applications :
Quantifying off-site particulate migration
Surveying for PM2.5 and PM10
Monitoring dust generation during drilling and excavation
Evaluating dust suppression and engineering controls
Locating and identifying " hot spots"
Emergency response and fugitive emissions compliance
Determining level of respiratory protection
Survey of workplace for OSHA/ EPA compliance
Evaluating worker exposure to airborne contaminants
Dust collector/ ventilation system checks
Monitoring lung-damaging particles in factories and buildings
Complementary instrument for all EPA and OSHA personal and ambient particulate air sampling
procedures
The EPAM-5000 Advantage
One compact instrument provides real-time data and gravimetric samples for analysis
Immediate display and datalogging of particulate concentrations
Data provides a graphic profile of PM sample
Added-value survey sampler for saturation monitoring studies
Allows immediate and permanent documentation
Reduces the number of manual gravimetric test as well as labor and analysis costs
Easy setup and operation — ready in 15 seconds
Performance Profile :
Sensing Range 0.001 to 20 mg/ m3
0.01 to 200 mg/ m3 ( optional)
Particle Size Range 0.1 to 100 µ m
Precision ± 0.003 mg/ m3 ( 3 µ g/ m3)
Accuracy ± 10% to NIOSH Method 0500 using SAE fine test dust
Sampling Flow Rate 4.0 L/ min with variable adjustment
Filter Cassette Holder
( optional accessory) 47 mm
Alarm Output 90 db at 3 ft
Analog Output 0 to 4 vdc
Recording Time 1 sec to 15 mos
Sampling Rate 1 sec, 10 sec, 1 min, and 30 min
Data Storage 21, 600 data points
Security Code 4-digit combinations
Memory and Time Storage > 10 years
Data Display Concentration in mg/ m3 and TWA, MAX, MIN, STEL, DATE, and Time
Digital Output RS232
Operating Temperature -10 to 50 C
Storage Temperature -20 to 60 C
Power Rechargeable lead-acid battery
Operating Time > 24 hrs
Charging Time 10 to 12 hrs
Dimensions ( case) 6 x 14 x 10 in
( 15.2 x 35.6 x 25.4 cm)
Weight 12 lbs ( 5.4 kg)
Masukan ke Produk RekananKenalkan ke teman Anda