Katalog Produk

Gambar lebih besar

PANEL ALARM SECURITY ALBOX ACP-611

Harga	Call Us
Jumlah Pesanan:	Tambah ke Keranjang
Cara Pembayaran	Transfer Bank (T/T), Tunai
Negara Asal	Taiwan

Keterangan

6 ZONE ALARM CONTROL PANEL
With Auto-Dialer and Communicator

ACP 611 is an alarm control panel with 6 hardware protection zones and 2 software zones for panic and duress
alarms. which is designed for home and office protections using the latest security concept It is built-in with voice autodialer
and data communicator in one unit. when alarm occurs. it gives local alarm warnings as like the traditional alarm
system and it also sends out the alarm status information to the monitor station and voice message and/ or numeric
message to the pre-set telephones and/ or personal pagers. as the system reports alarm event through multiple media
to the appropriate parties, which guarantees that no alarm reporting will be lost even one of the parties is not on duty.
the ACP611 alarm control panel is fully compatible with the ALARM-MONITOR software MS-980 which Is an Ideal tool
in setting up an alarm monitor station with personal computer for the small to medium size community, such as a
monitor station at an estate management office, the security control office of a commercial residential building and
even a police sub-station. the ACP 611 is compatible with all the public telephone systems.

Each ACP 611 comes with built-in full feature control console. auxiliary control consoles are required to
purchase separately. Both console are having the same functions except the built-in microphone for message
recording is not available on the auxiliary control console.

Main Features Of The Auto Dialer & Communicator
- Two 32 Digit telephone numbers
- for communicator
- Four 32 digit telephone numbers for auto-dialer
- Tone dialing ( DTMF) or pulse dialing possible
- Communicator data in DTMF Formal with check-sum
- Remote Arm-Disarm from any DTMF Telephone or mobile phone
- Programmable pause time between any digits
- Alarm / status reports from communicator to monitor station
- Programmable voice message and numeric message for auto dialer
- 20 Seconds non-volatile
- User programmable voice message
- Controllable & prolongable listen-in duration
- Back-Up or non-back-up alarm reporting
- Telephone line fault detection at arm-disarm control
- Programmable of dialing attempts, 8 attempts maximum
- Programmable of message repeats, 8 repeats maximum
- Selection of communicator & dialer calling combinations
- Telephone numbers can be tested individually
- Use existing telephone line, no additional line is required
- Compatible with all the public telephone systems & those PBX systems using tone-dialing telephone

“ Your safety and security is our priority “

Main Features Of The Alarm Control Panel
- 6 Zones. programmable for Instant delay.
- 24 hour Instant or 24 hour silent alarm reporting
- Programmable master code, client code & 8 user codes
- All user codes with duress function
- Protection zones are programmable for single or multiple triggering
- Programmable timers for exit delay, entry delay 1 & 2. and alarm duration
- Arm-Disarm on site or remotely from any DTMF telephone or mobile phone
- Programmable response time for each protection zones
- Arm-Disarm ring back notifications
- Exit and entry beep ON-OFF options
- Instant arming codes for home or away operation
- Built-in dynamic battery charger and tester
- Periodically auto or manual battery testing
- On board activation or panic and duress alarms

Specification
- Maximum 3 auxiliary control consoles can be connected
-Home and away operations
- Forced to arm or arm prohibited options
- Handover operation option tor Instant zones
- Connection facilities for siren/ beII, satellite siren and strobe light
- Power low watchdog resets system before battery exhausted
- Non-Volatile memory
- 12V 1.2Ah Back-Up battery ( not included)
- 12-16V DC operation ( power adaptor not included)
- Tamper-proof
- Weight Control panel - 1, 2Kg. ( Metal box)
- Control console - 220g. ( Plastic box)
- Dimension: Control panel - 116( H) x 180( W) X 67( D) mm
- Control console - 117( H) x 117( W) x 27( D) mm