Katalog Produk

Keterangan

The Fluke 1623 and 1625 are distinctive earth ground testers that can perform all four types of earth ground measurement. Specifically, the Fluke 1623 and 1625 testers are able to measure earth ground loop resistances using only clamps – called Stakeless testing. This method doesn’ t require the use of earth ground stakes or the disconnection of ground rods.

Testing Methods
3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.

The Fluke 1625 offers these advanced features
Automatic Frequency Control ( AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value
R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
Adjustable limits – for quick test result verification.

Features:
3- and 4-pole earth ground measurement
4-Pole soil resistivity testing
2-pole resistance measurement AC
2- and 4-pole resistance measurement DC
Selective testing, no disconnection of ground conductor ( 1 clamp)
Stakeless testing, quick ground loop testing ( 2 clamps)
Earth impedance measurement at 55 Hz
Automatic frequency control ( AFC) ( 94, 105, 111, 128 Hz)
Measuring voltage switchable 20/ 48V
Programmable limits, settings
Continuity with buzzer

Includes:
Fluke 1625 tester
2 test leads
Batteries
Users manual