Katalog Produk

Keterangan

Under West Germany and Japan technique cooperation, the resin our company produce combines the excellent qualities of organic and In – organic which match with/ or fit into any kinds of materials that industries may use. The rigid, strong and elastic quality of the hardness conform to many functions and purposes.

Trends of domestic industrials are stepping towards the hi-tech and high quality word. After having accumulated years practical experiences and excellent achievements, our company is capable to provide customers higher quality products with many varieties to meet with industrials requirements.
Adopting Best Block Epoxy Coating 2000 products ( or way of doing job? ) is the sign of reaching the high tech future world.

FEATURES
• Seamless / No joint, flat and glossy
* Clean looking
* Non-dusting surfaces
* Easy to be cleaned, maintained, and repaired
• Bacteria proof, anti – fungus
• Unaffected by hot or cold water
• Chemical resistant ( Acid & Alkali Resistance)
• Anti – Solvent, water proof
• Hygienic, easily sterilized surface
• Minimal risk of cracking, can absorb the impact of heavy weights and high vibration.
• Secure of the Environment
• Scratch Resistance

RECOMMENDED FOR
• Hospital, Pharmaceutical Industries
• Food & Beverages Industries
• Electronic & Computer Industries
• Chemical, Water and Oil Industries
• Packaging & Printing Industries
• Garment & Textile, Pulp & Paper Industries
• Aircraft Hangars and Engine Testing Facilities
• Auto Workshops, Garages, and Parking Area
• Cosmetic Industries, Optical Industries
• Hi – Tech Product Industries
• Clean Room Facilities, Warehouse and Reservoir
• Swimming – pool Wall and Road ( Non Slipped)
• Water & Waste Water Tank

GENERAL PROPERTIES
Compresive strength KgF/ Cm² ' b2 + 600 -+ 800 ( ASTM D695-537 / ASTM C109)
Tensile Strength KgF/ Cm2 + 200 -+ 350 ( ASTM C190 / ASTM D638)
Abrasion Resistance gr + 0, 18 -+ 0, 3 ( DIN 52008)
Bonding Strength KgF/ Cm2 + 30 -+ 35 ( ASTM C348)
CHEMICAL RESISTANCE
Acietic Acid Very Good
Nitric Acid Very Good
Ammonia Very Good
Oxalic Acid Very Good
Chromic Acid Very Good
Potassium Hydrixide Very Good
Citric Acid Very Good
Phosphoric Acid Very Good
Coustic soda Very Good
Sodium Chloride Very Good
Fatty Acids Very Good
Sulfuric Acid Good
Hydrochloric Acid Very Good

PROSEDURE
1. Application water-proof sheet before placing Prima on the ground floor
2. All the surface of R .C should be polished by electric trowel or coated with cement mortar, but not sprayed with cement powder.
3. The polished surface of R .C. should be smooth and should have a pertinent angle slope to sheet water.
4. A curved form of mortar, with radius of 5 cm at least, should be attached to the angle of 900 between the wall and floor of a place or a room which needs cleaning and anti – corrosion.
It takes 4 weeks for R . C. layer and 2 weeks for P . C . layer to become completely cemented. The object coated must be fairly dried before coating
5. The quantity of water contained in it must be below 8 %
6. Rubber boards as protection cushions are installated on zones having been impacted by heavy things or on zones having been cut or ruined by sharp things.
7. Rubber tire should be used for cars driven by manpower.
8. To use vacuum cleaner to clean the dust or the mote of raw materials is all right.
9. Do not use the high-speed wax-polisher, but use the oil-cleaner or detergent to wash away the wet or dry greasy and dirty things and then use the rubber scraper the dirty things away so as to protect the coated floor.
10. Damaged floor can be partly repaired.