Keterangan :

FE 50 magnetic drilling machine
Motor power: 1150 Watt
Spindle: Morse taper 2 - 19 mm ( 3/ 4" ) Weldon
Hole cutter / annular cutter short: Ø 50 mm ( 2" )
Hole cutter / annular cutter long: Ø 50 mm ( 2" )
Twist drills: Ø 23 mm ( 7/ 8" )
RPM: I 250 min-1 - II 450 min-1
Stroke: 150 mm ( 5.91" )
Weight: 13 Kgs ( 26.8 Lbs)
Magnet power: 1700 kgs ( 3748 Lbs)

Why you should choose for FE 50 magnetic drilling machine:
FE 50, the allrounder. The exchangable morse taper 2 makes this machine an allround machine for all drilling purposes. This machine is powered by a strong 1150 watt Eibenstock drill. An continuous internal coolant system is an optional supply for this machine. For all available cutting oils. please check our cutting oil section of our website.. To be able to use other manufacurers cutters in the FE 50 please check out the adapter section on our website.

All our machines can be supplied in 110 Volt as well as in 230 Volt.
Standard delivery of FE 50 contains:
1 Morse taper no 2
1 pilot pin FEPP 75( Ø 6.35x79 mm)
1 pilot pin FEPP 100( Ø 6.35x103 mm)
1 Morse taper no 2 remover
1 transport carrying case
1 safety chain
1 manual