Type 6144 is a direct-action 3/ 2-way solenoid
valve designed for neutral gases and liquids.
Through the movement between the 2 end
positions, the switching element (  ipper) seals
one of the two opposing valve seats and
connects the other to the working port.
This movement is caused by the solenoids
magnetic
eld pushing a permanent magnet
that is
xed to the  ipper element.
In addition to its exceptional performance
characteristics, the  ipper principle is especially
marked by its very low switching noise and its
low wear level.
Furthermore, integrated medium separation
enables use above and beyond pneumatic
applications.
Depending on the case of operation, various
 ange connections are available that are
suitable for both individual and block mounting.
Installation advice: The valve must have a minimum distance of 5 mm from other ferromagnetic materials in order to avoid malfunctioning
during operating conditions