Selamat Datang di
CV. FAJAR 99

Anggota Gratis
CV. FAJAR 99
CV. FAJAR 99
Indonesia

CONCRETE EQUIPMENT

CONCRETE EQUIPMENT
Kumpulan alat-alat concrete (TEST BETON)
PilihKotak Centang dan klikatauatau
menampilkan 1-17 dari 17
Tampilkan di setiap halaman
  • DIGITAL DIRECT / Residual SHEAR Apparatus

    DIGITAL DIRECT / ....

    SILAHKAN HUBUNGI KAMI

    DIGITAL DIRECT / Residual SHEAR Apparatus
    For determining shearing resistance of soil sample. Consist strain, hand operated. Shear loads are applicatedby a gear box loading jack....

  • DIRECT SHEAR TEST SET

    DIRECT SHEAR TEST....

    SILAHKAN HUBUNGI KAMI

    DIRECT SHEAR TST SET
    For determining shearing resistance of soil sample. Constant strain, hand operated. Shear loads are applicated by gear box loading jack and measured by....

  • MOTORISED COMPRESSION MACHINE

    MOTORISED....

    SILAHKAN HUBUNGI KAMI

    MOTORISED COMPRESSION MACHINE
    Electric 220 V AC, 50-60 Hz, 1000 watt, 1 Phase
    Single action, variable speed
    6000 ml reservoir capacity
    Maximum working pressure 50000 kPa.
    ....

  • HYDRAULIC CONCRETE BEAM TESTING MACHINE

    HYDRAULIC CONCRETE....

    SILAHKAN HUBUNGI KAMI

    HYDRAULIC CONCRETE BEAM TESTING MACHINE
    For determining the flexural strength of concrete beam by using a simple beam with third point loading. 100 kN cap, hydraulic hand pump, ....

  • AIR CONTENT of FRESH MIXED CONCRETE

    AIR CONTENT of FRESH....

    SILAHKAN HUBUNGI KAMI

    AIR CONTENT of FRESH MIXED CONCRETE
    ASTM C-231 / AASHTO T-152
    For determining the air content of freshly mixed concrete from observation of the change in volume of concrete with....

  • VIBRATING TABLE

    VIBRATING TABLE

    SILAHKAN HUBUNGI KAMI

    VIBRATING TABLE
    For compacting aggregate in steel container or concrete sample in cube / cylinder mold.
    Or concrete sample in cube / cylinder mold.
    Dimension ( L x W x H) : 55....

  • SLUMP TST SET

    SLUMP TST SET

    SILAHKAN HUBUNGI KAMI

    SLUMP TST SET
    ASTM C-143 / AASHTO T-119
    For determining slump/ workability of concrete both
    In the laboratory and in the field.
    Dimension ( L x W x H ) : 70 x 70 x 50 cm
    ....

  • HYDRAULIC COMPRESSION MACHINE

    HYDRAULIC....

    SILAHKAN HUBUNGI KAMI

    HYDRAULIC COMPRESSION MACHINE
    Hydraulic electric Pump Compression machine
    200 kN Capacity , ASTM C-39
    For determining compressive strength of concrete cube 15 x 15 x 15 cm, or....

  • DIGITAL TEST HAMMER

    DIGITAL TEST HAMMER

    SILAHKAN HUBUNGI KAMI

    DIGITAL TEST HAMMER
    ASTM C-805
    Automatic electronic calculating of the mean rebound number and compressive strength, Digital and print out of the full record of test result, PC....

  • CALIBRATION ANVIL

    CALIBRATION ANVIL

    SILAHKAN HUBUNGI KAMI

    CALIBRATION ANVIL
    ASTM C-805
    The anvil is used to enable routine check to be made on the operation concrete test hammer

    PLEASE CONTACT US FOR MORE INFOâ € ¦

  • LABORATORY CONCRETE MIXER

    LABORATORY CONCRETE....

    SILAHKAN HUBUNGI KAMI

    LABORATORY CONCRETE MIXER
    For mixing trial bathes of concrete for mix design, Approx. 70 ltr cap, 4 mixing blades, welded steel frame, 2 wheel for easy movement, electromotor 1/ ....

  • VERTICAL CYLINDER CAPPING

    VERTICAL CYLINDER....

    SILAHKAN HUBUNGI KAMI

    VERTICAL CYLINDER CAPPING
    ASTM C-617
    Equipment for forming caps on ends of 15 cm diameter
    Concrete cylinder to provide uniform loading surface for compression test.
    Dimension ....

  • MODULUS of ELASTICITY IN CONCRETE TEST SET

    MODULUS of....

    SILAHKAN HUBUNGI KAMI

    MODULUS of ELASTICITY IN CONCRETE TEST SET
    For measuring average axial deformation of concrete cylindrical
    Sample during compression test, cast alumunium, dial indicator 0, 001....

  • CONCRETE TEST HAMMER CON DESTRUCTIVE TESTING

    CONCRETE TEST HAMMER....

    SILAHKAN HUBUNGI KAMI

    CONCRETE TEST HAMMER CON DESTRUCTIVE TESTING
    ASTM C-805
    For rapid measure the resistant of concrete to input of penetration. From the measurement it is possible to obtain an....

  • CONCRETE CYLINDER MOLD

    CONCRETE CYLINDER....

    SILAHKAN HUBUNGI KAMI

    CONCRETE CYLINDER MOLD
    Cast iron forming concrete cylinder sample
    Dimension ( L x W x H ) : 15 x 15 x 25 cm / 20 x 20 x 35 cm
    Gross weight : 12 kg / 17 kg
    CONCRETE CYLINDER....

  • CONCRETE CUBE MOLD

    CONCRETE CUBE MOLD

    SILAHKAN HUBUNGI KAMI

    CONCRETE CUBE MOLD
    Cast iron, forming concrete cube sample
    Dimension ( L x W x H ) : 20 x 20 x 15/ 25 x 25 x 20 cm
    Gross weight : 14 kg / 19 kg
    CONCRETE CUBE MOLD
    10 x 10 x....

  • CONCRETE BEAM MOLD

    CONCRETE BEAM MOLD

    SILAHKAN HUBUNGI KAMI

    CONCRETE BEAM MOLD
    Cast iron, forming concrete beam sample
    Dimension : ( L x W x H ) : 20 x 70 x 20 cm / 25 x 90 x 25 cm
    Gross weight : 40 kg / 60 kg
    CONCRETE BEAM MOLD
    15 x....

PilihKotak Centang dan klikatauatau
menampilkan 1-17 dari 17


Anda mendapat [3] permintaan baru.
Ke Menu Anggota

Depan - Penawaran Dagang - Daftar Produk - Daftar Permintaan - Daftar Kerjasama - Daftar Perusahaan
© 2024 Indotrade.com. Hak Cipta Dilindungi Undang-undang.