Katalog Produk

Keterangan

BENCHTOP MUFFLE
Model Number: F47910-26

Product Description:
• Two open coil heating elements on sides of chamber assure fast heat-up, with minimum temperature gradient.
• Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient ceramic insulation.
• The rear of the chamber incorporates a 0.38" (0.95 cm) diameter port for monitoring chamber temperatures with independent measuring devices.
• All models shipped complete with power cord.
• Power cord supplied with all models.

Operation :
• Built-in vent port removes undesirable contaminants and
moisture; extends the life span of the element and unit.
• Four temperature controller models:
A1: Digital single set point control. A single display shows actual temperature or set point.
B1: Digital single set point control with a single ramp to set point and a dwell. A single display shows actual temperature or set point. The furnaces that use this control also utilize a mechanical Over Temperature Protection relay.
C1: Digital programmable control with one stored program of 8 segments. The furnaces that use this control also utilize a mechanical Over Temperature Protection relay.
D1: Digital programmable control with 4 stored programs, 16 segments per program. The controller also includes RS232 communications. The furnaces that use this control also utilize a mechanical Over Temperature Protection relay.
* For Calibration Verification System, see Pyrometers.

Safety :
• Door safety switch protects operator by removing power to the heating elements upon opening the door.
• Thermocouple break protection cuts power to the heating elements, prevents a thermocouple failure runaway condition.

Applications :
• Gravimetric analysis
• Sintering
• Quantitative analysis
• Heat Treating

Amps 4.2
Chamber Cubic Inches L 120 (2.0)
Chamber Dimensions D 6 (15)
Chamber Dimensions H 4 (10)
Chamber Dimensions W 5 (13.7)
CUL false
Desc Benchtop Muffle Furnace
Hertz 50/60
NRTL false
Operating Temp Range C 100-1200
Operating Temp Range F 212-2192
Overall Dimensions D 15.5 (39)
Overall Dimensions H 18.5 (47)
Overall Dimensions W 11.3 (28.5)
Product Line Thermolyne
Shipping Weight LK 41 (18.5)
Stability at 1000 ±0.4°C
Sub Product Group Id 97
Temp Control Group A1
Uniformity at 1000 ± 4.8°C
Volts 240
Watts 1000