Katalog Produk

Keterangan

- Highly versatile optical power meter for production lines, R&D and maintenance
- Compensation function for the laser light source testing
- Dual power system
- Fully remote operation via USB interface

Basic specifications :

Optical power measurement : W, dBm
Range setting : Auto (Manual setting available)
Accuracy : ±0.7% (±5% in combination with the optional sensor)
Wavelength sensitivity compensation : Can be set for every 1nm.
Automatic compensation for the sensor’s sensitivity
Max. 10 wavelengths preset (including initial value for a sensor)
Scaling : Can be set for each wavelength.
Relative measurement : Display the relative value to the measured value or set value.
(Displayed value = Measured value – Reference value)

Reference value can be set from the measured value or manual input.
Settable range: 0.001nW to 1.9999W (-90.00dBm to 33.00dBm)

Display : 4-1/2 digit, (19999 max.), Display resolution: 0.01dBm / 0.01dB
Measurement display unit : nW, mW, mW, dBm, dB
Wavelength display : 4 digit, Unit: nm
Display update rate : 330ms approx.
MAX/MIN display : Maximum and minimum value display while measurement
Average display : Display the moving average value.
Averaging times: 2 to 100
Analog output : 1V approx. when the sensor calibration point input
Output resistance : 50©
Output connector : ø3.5 mini jack
Interface : Output measurement value and remote control
Auxiliary functions : Auto power save, Setting backup, Battery check
Safety : EN61010-1: 2001 Pollution degree 2
Power supply : AA (LR6) × 4, AC adapter (9445-02
Max. rated power : 1.6VA
Continuous battery operation : 60 hours approx. (continuous use with the 9742 at calibration point input)
Dimensions and weight : 85(W) × 160(H) × 35(D) mm, 270g (excluding batteries)