Katalog Produk

Keterangan

FULLTEST4058N model is designed to perform essential tests in industrial environments on electrical machines devices and partially type-tested assemblies ( PTTA) in compliance with IEC/ EN60204-1: 2006 and IEC/ EN60439-1 respectively. The meter principally performing continuity test on potential equalising conductors with > 10AAC test current, insulation resistance with 500VDC test voltage and withstanding tests with 1000AC test voltage ( for electrical machine devices) and 2500V test voltage ( for individual test on PTTA assemblies switchboards) . Withstanding test is performed also in BURN mode with no limits on trip-out current. Discharging time measures of internal capacitance and on external plugs of device under test complete the list of possible test with this meter.
The new release 2006 of IEC/ EN60204-1 standard included a different way to perform the continuity test on protection conductors and now the limit threshold of resistance depends on also by values of Loop Phase-PE impedance of the power source and from the type of protection ( typically magnothermic) which are mounted on the installations. Based of this, the meter can be connected with the IMP57 optional accessory to perform the Loop impedance ( with high resolution 0.1mOhm) and defined automatically the limit threshold according to the standard avoid complex calculations to the final user.
As FULLTEST4050 more advanced model also FULLTEST4058N have a built-in internal memory to save all measurement results and a RS-232 PC’ s interface for directly transfer of saved tests by dedicated Windows software. The model is fitted inside a practical and protected plastic case board with no flammability and a membrane keyboard for rapid selection of functions is included on the frontal panel together a wide custom display. FULLTEST4058N is the ideal solution for any kind of verifier and/ or industrial installer to performing easily and rapid test on industrial appliances.

STANDARD
CE mark
EN 60439-1 ; EN60204-1
EN 61557-2 Insulation Resistance
EN 61326 EMC Standards
EN60204-1: 2006 safety of electrical devices equipment
IEC 60439-1 Type-tested assemblies TTA and partiallytype-tested assemblies PTTA
EN 61010-032
EN 61010-1

FUNCTION
* Continuity of protection conductors with 12V/ > 10AAC
* Insulation Resistance with 500VDC test voltage
* Withstanding test with 1000VAC fixed voltage
* Withstanding test with 1000VAC fixed voltage in BURN mode
* Withstanding test with 2500VAC fixed voltage
* Withstanding test with up to 2500VAC in BURN mode
* Discharging time test
* Loop Phase-PE impedance ( with IMP57 optional accessories)
* Test on magnetothermic protection with curve B and C
* Nominal current of magnetothermic protection selectable up to 63A
* Programmable timer on tests
* Programmable thresholds trip-out current
* Internal memory
* RS-232 serial interface

ACCESSORIES
Included accessories:
* KITFULLTEST: set 4 cables + 4 alligators clip + 1 safety test lead
* C7000: set 2 cables with 1 fixed alligator, 3m
* KIT13300WS: set 2 cable with test lead + 1 cable with safety alligator clip
* C7001: power supply cord
* TOPVIEW: Windows software + RS-232 serial cable C232NG1
* BORSA2000: accessory bag
* Calibration certificate ISO9000
* User manual

Optional accessories:
* IMP57: accessory for Loop impedance measurement with high resolution