SWINGFOG SN 50 ( Mesin Thermal Fogging)[27 Apr. 2010, 2:47:12]
Keterangan
SWINGFOG SN 50 ( Mesin Thermal Fogging)
SWINGFOG SN 50
Portable machines, available with four types of spraying tank made of stainless steel or synthetic material ( polyethylene) .
Spraying tank, stainless steel, capacity 6, 5 l
SWINGFOG SN 50
Technical Data ( approx.) SWINGFOG SN 50
Power, combustion chamber 18.7 kW / 25.4 hp
16, 100 kcal/ h
Fuel Consumption 2 l/ h
Fuel Tank Capacity 1.4 l
Spraying Tank Capacity SN 50: 6.5 l
SN 50 PE: 7.0 l
SN 50-10: 9.0 l
SN 50-10 PE: 10.0 l
Overpressure in the fuel tank 0.08 bar
Feed Pressure in the 0.3 - 0, 4 bar
spraying tank
Ignition Through 4 dry batteries in
series ( negative on ground)
Electronic ignition coil
Output Quantity* in relation to the nozzle size
* The indicated output quan-tities vary, dependent on the
viscosity properties of the liquids used. The output
values should be considered Nozzle 0.7 – 10.0 l/ h
as a guideline, measured with water. The maximum output Nozzle 0.8 – 14.0 l/ h
can be further increased by approx. 25 % , when larger Nozzle 0.9 – 17.5 l/ h
nozzles are applied, but this may cause an unsatisfactory droplet spectrum. Nozzle 1.0 – 20.5 l/ h
Nozzle 1.1 – 23.5 l/ h
Nozzle 1.2 – 27.0 l/ h
Nozzle 1.4 – 32.0 l/ h
Nozzle 1.7 – 42.0 l/ h
Weight, empty SN 50/ SN 50 PE: 8.8 kg
SN 50-10: 9.3 kg
SN 50-10 PE: 9.1 kg
Dimensions ( L x W x H) SN 50: 133x29x33 cm
SN 50 PE: 133x29x33 cm
SN 50-10: 133x34x33 cm
SN 50-10 PE: 133x34x33 cm
Special Types/ Accessories SWINGFOG SN 50
Automatic cut-off device ”
for the spraying mixture
Special fog applicator SN 50 A ”
Output nozzles • 1.0 ( installed) / 0.8 / 1.2
° 0.7/ 0.9/ 1.1/ 1.4/ 1.7