Selamat Datang di
CV. BANGKIT JAYA MANDIRI

Anggota Gratis
CV. BANGKIT JAYA MANDIRI
Indonesia
  • Katalog Produk

    MS Series - Modular Multistage Pump

    MS Series - Modular Multistage Pump

    Jumlah Pesanan:

    Keterangan :

    The SIHImulti pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN 25199.

    Benefits: SIHImulti
    • Advanced modular design reduces the number of parts while maximizing interchangeability.

    • Optimal selection of impeller diameter and diffuser size installed in a standardized casing ensures that the pump matches the required duty for each application.

    • The first stage of each pump size is equipped with a low required NPSH suction impeller.

    • Axial thrust is hydraulically balanced by a patented balanced drum system with self-adjusting throttle device.

    • Generously sized angular contact ball bearings absorb residual thrust.

    • The pump can be built with an axial, vertical, left or right suction and a vertical, left or right discharge in any combination.

    • All pump sizes can be provided with one or more " dummy " stages, if required.

    Features: SIHImulti
    • The pump is driven from the discharge side and the rotor is supported on the side by grease-lubricated anti-friction bearings and on the suction side by self-adjusting sleeve bearing lubricated by the pumped liquid.

    • The pump feet are mounted to the suction and discharge casings in such a manner that the suction casing ( for suction casings with radial branch) and discharge casing can be swung to suit the installation conditions.

    • Casing components are sealed by O-rings and held together with tie rods.

    • The balancing line is returned to the suction casing or to the upstream vessel.

    • The mechanical shaft seal is located on the drive side only. Sealing can be ( cooled or uncooled) single acting mechanical seal, packed gland ( cooled or uncooled) or double-acting mechanical seal ( uncooled) .

    Technical Data:
    Flow rate max. 1100 GPM ( 250 m³ / h)
    Head max. 2067 feet ( 630 m)
    Speed max. 3600 rpm
    Temperature 14 to 356 F ( -10 to + 180° C)
    Pressure Rating max. 914 psi ( 63 bar)
    Shaft seal mechanical seal
    packed gland

    Industries:

    Power
    Water & Wastewater Treatment Plants
    Irrigation
    Chemical & Process
    Pharmaceutical
    Food
    And many More

    Applications:

    Boiler feed
    Condensate systems
    Pressure boosting
    Irrigation
    High pressure cleaning
    Heating
    Waterworks, and water supply
    Reverse osmosis
    Chemical and Process
    And many more ...



Anda mendapat [3] permintaan baru.
Ke Menu Anggota

Depan - Penawaran Dagang - Daftar Produk - Daftar Permintaan - Daftar Kerjasama - Daftar Perusahaan
© 2024 Indotrade.com. Hak Cipta Dilindungi Undang-undang.