jual mold cadweld indonesia, powder cadweld indonesia, kumwell indonesia

Jumlah Pesanan:

Negara Asal:

Amerika Serikat

Cara Pembayaran:

Transfer Bank (T/T)

Payment can be by VISA/ MASTERCARD + 1.5% ( mobile/ di tempat bapak daerah DKI Jakarta)

For your grounding and earthing connections need, you can use either cadweld indonesia or kumwell indonesia as for either mold cadweld or mold kumwell as long as it used with powder cadweld or powder kumwell.
Exothermic
Welding
Exothermic welding is a molecular bonding of high conductivity high copper content alloy ( Copper > 93% ) and high corrosion resistance.
Line of current comparasion
Mechanical Crimped ConnectionBonded Exothermic Connection

Grounding
Kumwell powder type KW application for grounding system make a permanent connection between the copper wire & the ground components such as rods , rebar , busbar etc. has test meets to standards.

UL 467 ( Grounding and Bonding Equipment)
IEEE std 837-2002 ( Standard for qualifying Permanent Connections used in Substation Grounding) This mold powder cadweld indonesia and mold powder kumwell indonesia are the largest and welknown manufactured of mold and powder all over the world including asia, africa, europe, america and australia.

Standard of For your grounding and earthing connections need, you can use either cadweld indonesia or kumwell indonesia as for either mold cadweld or mold kumwell as long as it used with powder cadweld or powder kumwell.

This mold powder cadweld indonesia and mold powder kumwell indonesia supposed to be in line with UL standard in certain article, as to reach a very good connection of grounding cable for heavy duty types.

Todays For your grounding and earthing connections need, you can use either cadweld indonesia or kumwell indonesia as for either mold cadweld or mold kumwell as long as it used with powder cadweld or powder kumwell.

This mold powder cadweld indonesia and mold powder kumwell indonesia share the biggest market for jakarta, surabaya, semarang kalimantan, sulawesi, sumatera and papua Indonesia.

Copper Bond
Ground Rod ( UL)
Kumwell Copper Bond Ground Rod , Research and Development at laboratory of K.M.L Technology Company Limited meets the requirement of the world’ s the most rigorous standards. UL467
Ground rods are made by molecularly bonding process 99.9% purity electrolytic copper onto a high tensile low carbon steel cores to ensure a perfect and even bonding between the steel and copper. The copper layer whose minimum thickness is 254 microns. Standard size diameter being the most popular used 1/ 2� , 5/ 8� , 3/ 4� , 1� .

The standard length range from 4' up to 10' Ground rods. Are also available in the sectional type with the same length and diameters above. These sectional rods are threaded on. both ends to allow rod-to-rod
connection by use the couplings. Special diameter and length can be requested.

Bending Test
There shall be no cracking when bending test. The application of force shall be the rod is permanently bent through a > 30° angle.

Thickness Test

More Effective
Grounding ( MEG)
Kumwell " MEG" , a conductive material powder, is effective in reducing grounding resistance in sandy, rocky, poor soil conductivity area. MEG is manufactured from environmentally safe and stable component with excellent shelf life-long storage.

Effective
Reducing grounding resistance lower than rod and wire alone.
Eliminate corrosion of ground wires and rods
Resistivity less than 0.12 © -m that meets IEEE 80 Std.
MEG is the answer where ground rod can not be driven or limited land area.
MEG is also low resistance permanent for the life of the grounding system.
MEG installation requires only minimum instruction and on special tools.

Code No. Weight
GRMEG - 11.5 kg. 11.5 kg. ( 25 lb) / bag
GRMEG - 25 kg. 25 kg./ bag

Home ›
Instruction
Exothermic Welding

Assembly mould with handle clamp.

Pre-heating with a butane torch to ensures the mould is totally dry before every first joint regardless new or used mould.

Clean the surface of conductors and Rod with a card cloth brush. And preheating with butane torch to ensure the conductors is totally dry.

Conductors and Ground Rod fits snugly into the mould and lock the handle clamp. Always make sure the mould a level position.

Place retaining disc and make sure the disc sits well at the base of the weld metal cavity.

Kenalkan ke teman Anda