Fusion Splicer

Jumlah Pesanan:

Cara Pembayaran:

Tunai

Features
Core to core alignment by PAS technology
( PAS:Profile Alignment System)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGA interface
Software upgrade via USB interface

Model KL-300T
Applicable fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length 8~16mmCoating diameter250µm
16mmCoating diameter: 250 ~ 1000µm
Fiber diameter Cladding diameter80 ~150µm
Coating diameter100~ 1000¼m
Fiber Count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02dB SM , 0.01dB (MM),
0.04dB (DS), 0.04dB( NZDS)
Splicing time Typical 9 secwith standard SM fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss 60dB
Storage of splice result 4000 results20 parameter per result
Fiber display and magnification 300XX or Y view ,150XX and Y view
Tube heating time Typical 30 sec
Tube heating mode 9(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable Protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2N
Electrode life 2500
No.of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screen 5.6 TFT inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals USB 1.1 and VGA
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%RH and -10^50, respectively, Max. wind velocity of 15m/s
Power supply AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions 150mm(L) x150mm (W) x150mm (H)
Weight 2.7 Kg excluding battery,3.2 Kg including battery

Kenalkan ke teman Anda