AU3004
This constant-speed tensioning type tester is used for determining physical properties such as tensile strength, compressive strength, bending strength and elongation. Each operation can be done by a single operation. Such ease of operation is highly evaluated. This is a universal type tester featuring multiple functions and a high cost performance. This tester can test various materials used in diversified fields, including papers, plastics, rubbers, textiles, metals, adhesives, paints, glasses, ceramics and compound materials.
Test items : A specific jig (optional) is necessary for each test.
(1) Tensile strength
(2) Compressive strength
(3) Bending strength
(4) Shear strength
(5) Bonding strength
(6) Delamination strength
(7) Tear strength
(8) Piercing resistance
(9) Bursting strength
(10) Rigidity
(11) Friction
(12) Z-direction tensile strength
Maximum load : 1 kN (100 kgf), 2.5 kN (250 kgf), 5 kN (500 kgf) Loading position : Tensile and compressive strength tests can
be made between the base and moving
crosshead
Crosshead stroke : 1140 mm
Effective test width : 420 mm
Crosshead speed : 14 speeds
0.5,1,2,3,5,10,20,30,50,100,200,300,500, 1000 mm/min.
Crosshead speed setting : from 0.5 to 999.9 mm/min. at 0.1
mm/min. intervals
Traversing : manual crosshead lifting and lowering:
low speed (1 mm/min.), mediu speed(50mm/min.),
highspeed (500 mm/min.) for both lifting and lowering
Crosshead speed accuracy : ± 0.2 %
Joe (chuck) : parallel clamping (standard),
pneumatic jaw (optional)
Extension indication : ± 0.000 to ± 999.9 mm digital indication Load cell : 1, 2.5, 5, 10, 25, 50, 100, 250, 500 kgf
Jaw : parallel clamping type: 1, 2.5, 5, 10, 25, 50, 100, 250, 500 kgf Upper fixed crosshead : between this crosshead and movable crosshead, it is possible to make tensile tests.
Recorder : automatic balance type (DC servo), with a single recording pen (red),
recording method: rapid pen recording (with felt tip pen)
recording paper: effective width 250 mm, 20 mm long
roll paper
Referential standards : JIS P-8113-98, TAPPI T494om-01,
ISO 1924/2
Power source : single-phase 100/110 VAC 50/60 Hz 5A Outer dimensions : 800 x 530 x 1670 mm
Instrument weight : 150 kg |
Prioritas Indotrade Tahun ke-17
