Keterangan :

Chemguard
6% AFFF

Chemguard 6% AFFF is a specially formulated, synthetic, aqueous film forming foam concentrate. A vapor suppressing aqueous film is formed by the foam solution draining from the expanded foam blanket. It is intended for use at a proportioning rate of 6% ( 6 parts AFFF concentrate to 94 parts water) on Class B hydrocarbon type fuels such as gasoline, kerosene, diesel, etc. Chemguard 6% AFFF is not intended for use on fuels, which are polar solvent/ water miscible such as alcohols, ketones, esters, etc.
FEATURES
U.L. Listed, Foam Liquid Concentrates
U.L. Canada Listed
Performance to ICAO, Doc. # 9137, Part 1, Chapter 8, Level “ B� verified
U.L. recommended application rate on hydrocarbon type fuel is .10/ gpm ft²
Suitable for use with either fresh or salt water
Excellent wetting characteristics when used in combating Class “ A� fuel fires
Suitable for use with both air-aspirating foam and standard water fog nozzles
Suitable for use with deluge or closed head foam water sprinkler systems
If inadvertently frozen, thawing will render product completely serviceable again
Suitable for use with carbon steel, fiberglass, polyethylene or stainless steel. Chemguard 6% AFFF is not compatible with galvanized pipe or fittings in an undiluted form.
Suitable for use with dry chemical extinguishing agents
PROPORTIONING
Fixed or portable in-line educator
In-line balanced pressure and pump pressure proportioning skid
Bladder tank balanced pressure proportioning system
Around the pump proportioner
Handline, air-aspirating nozzle with fixed eductor pickup tube
DISCHARGE DEVICES
Foam Chambers
Air-aspirating and non air-aspirating sprinkler heads or spray nozzles
Standard water fog nozzles for hand lines and monitors
Air-aspirating foam nozzles
Foam makers for use with either Floating Roof storage tanks or Dike/ Bund protection systems
High back pressure foam makers for sub-surface base injection system ( hydrocarbon fuels)
APPLICATIONS
Crash Fire Rescue
Storage Tanks( non-polar solvent fuels only)
Truck/ Rail loading or unloading facilities
Processing/ Storage Facilities
Docks/ Marine Tankers
Flammable Liquid Containment Areas
Mobile Equipment
FOAM PROPERTIES
Aspirating type discharge devices typically generate expansion ratios between 6-10 to 1 when 6% AFFF is mixed with water at the correct ratio. Non-aspirating type devices will typically generate expansion ratios of between 2-4 to 1. Expansion ratios are dictated by the type of discharge device, flow rate and discharge pressure.
TYPICAL PROPERTIES AT 77º F ( 25º C)

Appearance Clear Slightly Yellow
Specific Gravity 1.011
pH 7.5
Viscosity 1.2 cps

ENVIRONMENTAL IMPACT
Chemguard 6% AFFF is biodegradable, low in toxicity and can be treated in sewage treatment plants. Please refer to Chemguard Technical Bulletin regarding foam products and the environment.
STORAGE
If kept in the original unopened and airtight Chemguard supplied container and stored within the temperature range of 35º F - 120º F ( 2º C - 49º C) a shelf life of between 20-25 years can be expected. When stored in other than the manufacturers supplied container, please check with Chemguard for storage guidelines.

ORDERING INFORMATION & WEIGHTS
Part No: Container Weight
C603P 5-Gallon Pail / 19 Liters 45 lbs.
C603D 55-Gallon Drum / 208 Liters 495 lbs.
C603BD 330-Gallon Tote / 1249 Liters 3000 lbs