Keterangan :

MERITâ„¢ S-6

Diameter ( mm)
Package
0.8/ 0.9/ 1.0/ 1.2/ 1.6
15/ 20 kg/ Carton
150/ 200/ 250/ 350 kg.Drum

Merit â„¢ S-6 is a low carbon, high manganese, very high silicon electrode. Used where higher alloy ( manganese and silicon) is needed. Allows welding over some rust and dirt. Shielding gases range from CO2 to high Argon Blends.

ADVANTAGE LINCOLN
Excellent Welding

* Characteristics- Meritâ„¢ S-6 Wire renders good wetting action, straight bead edges, excellent arc action and high resistance to rust or mill scale porosity.
* Better Wire Feeding- less down time, higher productivityconsistently stiff wire, no soft spots. Unique drawing method and special lubricants provide a smooth surface appearance, less friction in the wire feeding system, and elimination of copper coating flaking during wire feeding.
* More Resistance to porosity in the weld deposit.
* Contamination on the wire surface is minimized in the manufacturing process.
* Quality Control of wire chemistry. Each incoming heat of raw material is carefully analyzed. This attention to quality control assures consistent wire chemistry for uniform user results in the field.
* Manufactured under a quality system certified to ISO 9001 requirements.

WELDING POSITIONS

TYPICAL APPLICATION
• Construction Equipment
• Agricultural Equipment
• Automotive
• Ornamental Iron
• Sheetmetal Containers
• Ductwork
• Tubular Framework
• Light to Heavy Structural Steel Fabrication
• Any Application Where a " Finished" Weld Appearance is Desirable

CONFORMANCE
Conforms to ER70S-6 per
AWS A5.18

DEPOSIT COMPOSITION
% C % Mn % Si % P % S
0.07 1.49 0.88 0.010 0.008