" L' EUROPEA" MOTOR WELDING SETS, ECONOMY CLASS GENERATORS.

Jumlah Pesanan:

Negara Asal:

Indonesia

Jumlah:

1 unit complete set

Kemas & Pengiriman:

1

" L' EUROPEA" Made in Italy
MOTOR WELDING SETS, ECONOMY CLASS GENERATORS.

* W 210 MHHPI ( ECONOMISER ) / MHEPI( ELECTRIC STARTER ) :
- Models are equipped with an asynchronous alternator with galvanically insulated windings
- Availabe in two versions, petrol and diesel, and with a number of different power outputs
- Weld with electrodes of any type, including basic and cellulose electrodes

- Power : 6 KVA ( MHHPI ) ; 4, 5 KVA ( MHEPI )
- Engine : HONDA GX 390
- Engine power : 13 HP - Tank : 6, 50 Lt
- LWA/ dB ( A) 7m t : 99/ 74
- Welding current : 30 – 210 Ampere
- Open-circuit : 95 V
- Welding voltage : 21, 2 – 28, 4 V
- Service : 60% 170 A ; 35% 210 A
- Diameter electrodes : ø 1, 5 – 5 mm
-Standard equipment : Battery charger 12V/ 10A ; Low oil level protection ; Thermal protection for windings ; Professional welder for cellulose electrodes ; Cord starting for W210 MHHPI ; Electric starting for W210 MHEPI ( battery included)

* E 5000 SBHPI :
- Mounted on a welded tubular frame, are particularly suited to be used as portable generators for private and construction sites
- The powerful engines are coupled to high-output synchronous alternators

- Cold starting
- Voltage : 230 V
- Protection : IP 23
- Motor : B & S 196432 PLUS
- Power : 4, 3 KVA
- Tank : 3, 8 Lt
- LWA/ dB ( A) 7m t : 98/ 73
- Standard equipment : Battery charger 12V/ 10A ; Low oil level protection ; Thermal prof. ( S 1) . Thermal magnetic prof. ( S 2)

* W 300 EREDI :
- Power : 10 Kva / 7 Kva
- Engine : Ruggerini RD 210
- Engine power : 20, 5 Hp
- Tank : 17 L
- LWA/ dB ( A) 7mt : 98/ 73
- Welding current : 30-300 A
- Open-circuit voltage : 75 V
- Welding voltage : 21, 2-32 V
- Service : 60% 250A – 35% 300A
- Diameter electrodes : 1, 5-6 mm
- Standard equipment : Professional welder for cellulose electrodes ; Automatic welding arc adjustment device ; Wheels and handles ; Optional polarity switch ; Optional economizer ; Welder cutout to prevent over heating ; Hour meter ; Electric start ( battery included)

* P 370 EREDI ( D370 PLASMA ) :
- Able to provide a number of functions: “ plasma arc cutting of metals� – “ electric arc welding� – “ power unit� – “ air compressor�

MOTOR
- No. cylinder : 2
- Swept volume : 954 CC
- Cooling : ARIA
- Power : 20, 5 Hp
- Rpm : 3000

GENERATOR
- Frequency : 50 HZ
- Single-phase power. 0, 9 : 230 V/ 7 KVA
- Three-phase power. 0, 8 : 400 V/ 10 KVA

WELDING CHARACTERISTICS
- Welding current : 30 – 300 A
- Current control : Electronic
- Trip voltage : 85 V
- Welding voltage : 21, 5 – 32
- Service : 250 A 60 % / 300 A 35 %
- Electrode diameter : Ø 1 – 6 MM

UTILIZATION FOR COMPRESSED AIR
- Max. capacity : 300 lt/ 1 min
- Pressure : 6 bar
- Compressor : piston
- Type : single-stage – alun etage
- Compressor cylinders no. : 2
- Compressor cooling : ARIA

PLASMA CUTTING CHARACTERISTICS
- Open circuit voltage : 260 V
- Cutting voltage : POS. 1 140V POS. 2 130V
- Cutting current : POS. 1 75A POS. 2 45A
- Max cutting thickness :
• Type stell – acier type “ C� 25 MM
• Aluminium – aluminium 20 MM
• Brass – lation 10 MM
• Bronze 10 MM
Stainless steel – acier inox. 20 MM

ß î sã credit hingga 3bulan, 6bulan atau sampai 3tahun.

Garansi unit 1-3tahun

Email : mandirimaju@ hotmail.com; mandiri_maju@ yahoo.co.id

Telp : 081916377999 ( XL) ,
088805105011 / 03133586520 ( Fren)

Untuk pertanyaan lebih bagus melalui email.

Kenalkan ke teman Anda