INFANT RADIANT WARMER HKN-93A " DAVID NINGBO"
INFANT RADIANT WARMER   State Food and Drug Administration 2005 No.: 3540553 CMDC TUV ISO9001 ISO13485 CE0123
Brief introduction:  servo-controlled by micro-computer with option of automatic control or manual control the   temperature; skin temperature sensor and bed temperature sensor; touch switch panel, setting   temperature, real temperature, and APGAR timer can display separately, heating power rate   indicates 0-100% ; multi-function self-checking alarms; horizon angle of radiant head can be adjusted in two ways, there are 2pcs of radiant boxes; inclination of bassinet is adjustable;  x-ray cassette is under the bed; 2pcs of oxygen cylinders and oxygen infusion device; RS232 connector, data output.   Standard configure:  radiation head, blue light radiant box ( 2pcs) , temperature controller, skin temperature sensor , bed temperature sensor, infant bed, I.V. Pole, tray, x-ray cassette, oxygen cylinders, oxygen   infusion device, low-pressure aspirator, resuscitation bag, infant head fixing frame, Stand. Technical specification:  Power supply  : AC220V 50HZ Power input: 950VA Temperature control range: 25 ~ 37  Sensor precision: d0.3  Uniformity of bed temperature: d2.0  Adjustment angle for the radiation head : 0° , 30° , 60 inclination of infant bed: ± 15°  APGAR Timer: it has sound indication in 1min, 5min, 10min.
Alarming:  with audible and visible alarm, and it can indicate the real temperature and cut off the power supply of heater;  Over-temp alarm: when the skin temperature > 39.5 ;  Deviation alarm: indication temperature deviates away the setting temperature ± 1 ;  Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the outside of bed;  Power failure alarm: when start up the unit, but there is no power and the power cord is disconnected. System alarm: when there is system malfunction inside of temperature controller. Package:  Gross Weight: 150Kg Measurement: 1270mm× 810mm× 1110mm
By. dumedpower